A lot of Yamaha bikes are ball type, which is fine from a handling point of view, but the MAJESTY125 has a lot of Stem gurgling problems!
So, I replaced it with this product of high durability.
Of course, the new one works great and is now normal from the dizzy Handling that seemed to mock up.
However, the replacement work is very Large strange, Top level so far (Large strange in a sense than full Overhaul by taking down the Engine)
It's not the kind of difficulty that can be managed with tools, and beating the Race is a feat of strength.
Of course, after all the rods around the front, we had to fight with the bearings for a few hours, and the race press fitment was also very careful.
If you don't know what you're doing, it's best to take it to a shop, because you won't be able to return it to its original state and take it to a motorcycle shop.
- Instock
467.54 NOK (6,757 JPY)
Leveringsinformasjon
In Stock, Ships within 24 hours.
Estimated arrival date around
Montering
-
YTM200 K-L
83-84
-
YTM200 EX
83-84
-
YTM200 EL
83-84
-
YSR80
87-93
Se alt
YAMAHA
Produkt detalj
Det er en Handlebar-del som er uunnværlig for høyhastighets kjøring som angitt av salgsresultater på mer enn 1 million i landsomfattende og europeiske land i mer enn 20 år. Spesielt er det trygt for høyhastighets kjøring på motorvei, Race stasjon Spesielt når det gjelder de nødvendige delene.
[Karakteristisk]
* Det er ikke noe spill i Håndtering fordi det er gjort opp ned TaperBearing.
* I motsetning til stålkule forekommer det ikke rust på grunn av fettskjæring. Mulig håndtering er mulig ved å forstørre lagerområdet.
* Fordi den bruker spesialstål, kan det brukes halvveis med en utveksling for å øke slitasjestyrken og tretthetsstyrken.
* I tilfelle av stålkule, siden bilkroppen og løpebelastningen ble mottatt på det punktet, kan spillet ikke tolereres av den harde bruken og det vil sannsynligvis forekomme lek.
* Selv om styringsdemper er festet, er det ingen mening uten å ha tiltak for jevn handling på hodekeglen, og det er også spørsmål om stabilitet ved høyhastighets kjøring. Når du bruker med styrespjeldet til NHK-håndtakets uskarphet forsvinner helt og du kan nyte en fantastisk håndteringsfølelse.
Forsiktighet
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Kunde anmeldelser
Reviews with image
Fits:YAMAHA YZ80 80-85, YAMAHA YZ250 A-C 82-84, YAMAHA YZ125 76-85, YAMAHA YTM225 DXK 83, YAMAHA YTM225 DX 83
Aug 4, 2021
Fits:YAMAHA YZ80 80-85, YAMAHA YZ250 A-C 82-84, YAMAHA YZ125 76-85, YAMAHA YTM225 DXK 83, YAMAHA YTM225 DX 83
Sep 7, 2015
Speaking of TaperBearing, this
It is an exchange from Ball which became the gorigol of 1997 formula SR.
It is troublesome to exchange frequently, so we made it as durable as possible Taper.
Unlike the sense of the previous gorillades, the Stir that makes a sudden turn is a pleasant one.
Fits:YAMAHA YZ80 80-85, YAMAHA YZ250 A-C 82-84, YAMAHA YZ125 76-85, YAMAHA YTM225 DXK 83, YAMAHA YTM225 DX 83
Jun 3, 2015
For the SR this is the best set of bearings to use. Due to the odd size of one bearing, other sets available on the market are never 100% correct. If you want tapered bearings this set is the best option.
View DetailFits:YAMAHA FZ250 FAZER , YAMAHA RZ250 R 49L , YAMAHA XJ400 80-85, YAMAHA YB125 , YAMAHA YB125 II 76-80
May 13, 2020
I'll believe in "Made in Japan quality"!
Frame headPipe Outer for under bracket bearing on the underside The process of typing lace was a battle with anxiety … Han Merlingu typing in is noisy (Neighborhood nuisance.) I was so scared because the position where the outer lace stops is so far back Is there any mistake in the parts? Is it possible that the handlebar is not turned off due to contact with the pipe?
The inner diameter of the outer lace is thinner than the diameter of the inner wall of the head pipe, so remove it again There are no dents in the bearing Also, when the bearing is worn out, the bearing's wall thickness is not in contact with the bearing's thickness, making it inoperable hellip; I was so worried
On the way, I tried to apply the Under bracket; Because it was not possible to turn back, I continued typing as it was
…As a result, the installation is complete I did We'll run for a while and see what happens It was a windy day, but the neck root (Stem) The feeling of rigidity transmitted from the car is increased and the car becomes stable and fun to drive
I think you should ask Shop to do the work for you
Fits:YAMAHA FZ250 FAZER , YAMAHA RZ250 R 49L , YAMAHA XJ400 80-85, YAMAHA YB125 , YAMAHA YB125 II 76-80
Mar 31, 2016
When you cut Handlebar there is a catch,
As I was concerned, I watched everyone's impressions and purchased
Carefulness is required for exchange, but take time
I think I can do it if I try
Let's ask Shop for those who do not have themselves
It is satisfying with Smooth operation feeling after exchanging
New Custom Articles
