I recently bought the SP Takegawa Titanium Alloy Tappet Adjusting Nuts for my Honda Monkey 125, specifically for the 181cc 4-valve kit upgrade. Here’s my review based on my experience:About Quality and Texture:The quality of the SP Takegawa nuts is impressive. The titanium alloy gives them a premium, solid feel while being lightweight. Compared to the stock tappet nuts, these are not only half the weight, but they also feel incredibly durable. The lighter weight helps reduce the load on the rocker arms, which in turn lowers stress on the engine. This kind of attention to detail in design and materials is something I really appreciate.About the Feeling of Use:After installation, I immediately noticed a smoother engine performance. The lighter weight of the tappet adjusting nuts seems to make the engine rev more freely. It feels like the rocker arms have less strain on them, especially at higher RPMs. The overall responsiveness of the engine has improved, and it gives me more confidence in pushing the 181cc 4-valve kit to its limits.Products to Buy Together:If you're upgrading the tappet adjusting nuts, I’d recommend getting SP Takegawa’s camshaft kit or a performance cam chain to fully optimize the performance of your engine. These complement the tappet nuts and maximize the performance gains.Difficulty of Installation:Installation was fairly straightforward if you have experience working on the top end of the engine. For those who aren’t familiar with engine tuning, it might be best to have a mechanic install it to ensure the nuts are adjusted correctly.Cost Performance and Comparison with Other Products:In terms of price, these are on the higher side compared to standard or aftermarket steel tappet nuts. However, the weight savings and performance boost they provide make them worth the extra cost. The fact that they are half the weight of the stock nuts makes a noticeable difference in engine stress and performance, which justifies the price for me.About Shipping and Packaging:The product was well-packaged and arrived in great condition. SP Takegawa always does a good job with shipping, and this was no exception. It arrived within a reasonable time, and the nuts were securely packaged with no damage.Any Concerns, Cautions, or Advice When Purchasing:One thing to keep in mind is that these tappet nuts are best suited for performance builds like the 181cc 4-valve kit. If you’re running a stock engine, the benefits might not be as noticeable. Also, ensure that you adjust the tappets carefully, as improper adjustment can affect engine performance or cause damage.Overall, I highly recommend these for anyone upgrading their Honda Monkey 125 with a performance kit. The reduction in weight really helps with engine efficiency, especially at high RPMs!
View Detail
76.11 ~ NOK (1,100 JPY)
Leveringsinformasjon
-
Please select product form first.
Montering
-
[Corresponding Vehicle]CUB Series Engine
-
ATC70
-
APE50
-
APE100
Se alt
HONDA
-
TT-R50
-
TT-R125
-
TT-RYB1-Four
-
TT-R90
-
GS50
-
GAG
-
BIRDIE80
-
ADDRESSV125
-
KSR110
-
KLX110
-
Vehicles with M5 thread pitch 0.5
Produkt detalj
Skruediameter: M5XP0.5
Materiale: Titanium Alloy Gold
[Kompatibel med SP Mukawa topplokk og låsearm]
APE
・ Regular/RStage/RStage+D
・ Superhode/Superhode+R/Superhode 4V+R
APE 50/100
・ RStage/Super headStage1-3/Super head+R
R Stage / Super Head Stage1-3 / Super Head + R
・ Superhode+R/Superhode 4V+R
Superhodet + R / Superhodet 4V + R
· Superhodet + R
[Normal sylinder bruk Locker Arm støtte]
[STD Cylinder Use Rocker Arm Correspondence]
MONKEY/GORILLA ・ MONKEY FI ・ SUPER CUB 50/70/90 ・ SUPER CUB 50 FI ・ SUPER CUB110 FI ・ DAX50/70 ・ CB50 ・ XE50/75 ・ XLR80 ・ CRF80/100 ・ NSF100 ・ APE50/100 ・ CB125T ・I DAG (AF62) · Dio (Af68) · Giorno (Af70)
MONKEY / GORILLA / MONKEY / FI / SUPER CUB50 / 70/90 / SUPER CUB50 FI / SUPER CUB110 FI / DAX50 / 70 / CB50 / XE50 / 75 / XLR80 / CRF80 / 100 / NSF100 / APE50 / 100 / CB125T / ATC70 / TODAY (AF62) / DIO (Af68) / Giono (Af70)
TT-R50 / 90 / 125cc ・ YB1-Four
• YAMAHA
GAG, GS50, BIRDIE80, ADRESSV125
• SUZUKIGAG / GS50 / BIRDIE 80 / ADRESS V125 • KAWASAKIKSR110 / KLX110
KSR110, KLX110
** Tilsvarende modell vil være referansemodellen.
* Vær oppmerksom på at produktspesifikasjonen kan endre seg på grunn av produsentens årsaker.
.
Justeringsmutter for hylser laget av lett, høystyrket gull i titanlegering.
I tillegg til materialendringen har den sekskantede bredden blitt endret fra 9 mm til 8 mm, noe som gir en vektreduksjon på omtrent 57%.. (Monkey normal ratio)
Redusert vekt forbedrer ventilens evne til å følge kamakselen.
Passer til mange typer vanlige sylinderhoder (passer til skruediameteren ovenfor) og SP Mukawa's topplokk (unntatt DOHC 4V og DESMO 4V) ..
Hvis den rene STD -mutteren som brukes er den samme som delenummeret nedenfor, kan den brukes ..
Kompatibel ren STD-mutter delenummer = Honda: 90206-001-000/Yamaha: 90170-05302/SEA BASS: 12843-04A00/Kawasaki: 92015-1137
Forsiktighet
* If there may be an instruction manual included, it will be written in Japanese.
MODEL PAGE LINKS
- APE50
- CB50
- CRF50F
- TODAY 50
- XE50
- XR50 Motard
- XR50R
- GORILLA
- Giorno (NCH50, Metropolitan)
- SUPER CUB 50 (C50)
- SUPER CUB 50 (C50)
- DAX ST50
- DIO 2st
- MONKEY
- MONKEY
- ATC70
- CRF70F
- XR70R
- SUPER CUB 70 (C70)
- DAX70 (ST70)
- XE75
- CRF80F
- XLR80
- SUPER CUB 90 (C90)
- APE100
- NSF100
- XR100 Motard
- CROSS CUB (CC110)
- Super CUB 110 (C110)
- Super CUB 110 (C110)
- 125T
- CT125 Hunter Cub
- MSX125 (GROM)
- MSX125 (GROM)
- MSX125 (GROM)
- MSX125 (GROM)
- Super Cub C125
- DAX125
- DAX125
- Monkey 125
- Monkey 125
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Kunde anmeldelser
Reviews with image
Fits:HONDA MONKEY125ThailandMODEL (MLHJB02/MLHJB03), HONDA DAX70 , HONDA XE50 , HONDA XR50Motard , HONDA XR50R
Installed on: HONDA Monkey 125
New Custom Articles
