边包质量很好，带快拆设计，与原厂边包支架搭配一键拆卸，非常防水，洗车时候即使对着冲也不会淋到里面；如果内侧脏了，可以直接翻出来擦拭清洁；配有肩带，拆下来就能背，底部配有基座，能放地上，个人觉得是一款很用心的边包。
View Detail
- Instock
1,251.85 NOK (18,092 JPY) 1,383.87 NOK Lagre 10%
Webike Point: +181 pt
(12.52 NOK)
Leveringsinformasjon
In Stock : 2 left, Ships within 24 hours.
Estimated arrival date around
Montering
HONDA
Open Fit Model Information Table
-
GB350
23 [Applicable model number]NC59-1100001- Right side is only available in small size. Cannot be attached to external saddlebag stays. Saddlebag stay (08L71-K0Z-J01)
-
GB350S
23 [Applicable model number]NC59-1100001- Right side is only available in small size. Cannot be attached to external saddlebag stays. Saddlebag stay (08L70-K0Z-J21
-
Rebel250
25 [Applicable model number]MC49-1500001- Cannot be installed at the same time as Daytona saddlebag support. Saddlebag stay (08L73-K87-A31)
-
Rebel500
25 [Applicable model number]PC60-1500001- Saddlebag stay (08L73-K87-A31)
Se alt
HONDA
Produktbeskrivelse under automatisk oversette av Google.
Produkt detalj
[Produsentens varenummer]
・ Venstre side: 08L05-K87-A31
・ Høyre side: 08L04-K87-A31
[Material / Material] Ballistisk nylon
[Størrelse]
・ Venstre side: Ca 325 (Høyde) X ca 320 (bredde) X ca 139 (Dybde) mm
・ Høyre side: Ca 225 (Høyde) X ca 320 (bredde) X ca 139 (Dybde) mm
[Kapasitet]
・ Venstre side: Ca 14L
・ Høyre side: Ca 10L
[Spes.]
・ One-touch flyttbar
· Tillatt lastekapasitet: 3,0 kg
[Inkluderte deler:]
Skulderstropp
Vanntett indre rygg
[Gjeldende maskin] MC49-1200001-
[Installasjonstid] 0,2 H
** Sadelbagopphold selges separat for installasjon (høyre side) Er nødvendig.
* Vennligst ikke forlatt verdisaker etc.
* Vær oppmerksom på at produktspesifikasjoner kan endre seg på grunn av produsentens årsaker..
* Bildet er bare for referanse. Bildet kan avvike fra det faktiske produkt.
Skulderrem følger med til daglig bruk, for eksempel å pendle til jobb og turnere.
Den bruker tøff og lett ballistisk nylon og leveres med en vanntett indre rygg i tilfelle regn.
Det er avtakbart med ett-trykk.
Separat nødvendig installasjon Deler Saddle Bag Bracket (Venstre side) (08L74-K87-A31).
Separat nødvendig installasjon Deler Saddle Bag Bracket (høyre side) (08L73-K87-A31).
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Kunde anmeldelser
Reviews with image
Fits:HONDA GB350S 23 [Applicable model number]NC59-1100001- Right side is only available in small size. Cannot be attached to external saddlebag stays. Saddlebag stay (08L70-K0Z-J21, HONDA GB350 23 [Applicable model number]NC59-1100001- Right side is only available in small size. Cannot be attached to external saddlebag stays. Saddlebag stay (08L71-K0Z-J01), HONDA Rebel1100 25 [Applicable model number]SC87-1000001- Not for use with Daytona saddlebag support. Saddlebag support (08L72-MLA-J01), HONDA Rebel500 25 [Applicable model number]PC60-1500001- Saddlebag stay (08L73-K87-A31), HONDA Rebel250 25 [Applicable model number]MC49-1500001- Cannot be installed at the same time as Daytona saddlebag support. Saddlebag stay (08L73-K87-A31)
Installed on: HONDA Rebel 250
Fits:HONDA GB350S 23 [Applicable model number]NC59-1100001- Right side is only available in small size. Cannot be attached to external saddlebag stays. Saddlebag stay (08L70-K0Z-J21, HONDA GB350 23 [Applicable model number]NC59-1100001- Right side is only available in small size. Cannot be attached to external saddlebag stays. Saddlebag stay (08L71-K0Z-J01), HONDA Rebel1100 25 [Applicable model number]SC87-1000001- Not for use with Daytona saddlebag support. Saddlebag support (08L72-MLA-J01), HONDA Rebel500 25 [Applicable model number]PC60-1500001- Saddlebag stay (08L73-K87-A31), HONDA Rebel250 25 [Applicable model number]MC49-1500001- Cannot be installed at the same time as Daytona saddlebag support. Saddlebag stay (08L73-K87-A31)
Mar 13, 2022
SW-MOTECH's Carrier for use with other manufacturer's motorcycles
It was diverted to MT-09.
Since it is an OEM of SW-MOTECH, it can be used in accordance with the company's Side carrier standard.
Can be diverted to manufacturers and car models to which it is not applicable.
The SLCCarrier-compatible bags on the market are all larger than this bag, so it is recommended that you use a bag that is smaller than this bag.
If the SLCCarrier can be installed on a car model, there will be almost no interference.
SLC SIDECarrier
https://www.webike.net/sd/23901865/
I was originally going to add a SIDEPannier with SLCCarrier support.
It was helpful that HONDA had released something with an affordable Size feel.
The mount is shared with the Pannier case, so it sticks out a little to the side.
Visibility is excellent when used with bar end mirror.
The shape of the external exhaust system that we replaced the side bag with is such that the exhaust hits the side bag directly.
This Size is valuable.
It is also a soft TextileBag, so it is flexible in what you can put in it. (The opening for taking out the bag is narrow, but …)
The MOLLE-compatible design also allows for a bottle holder or drawstring to be attached afterwards.
However, because it is easy to remove, it is not so easy to leave it on (i.e., little consideration is given to security such as locks). So when you pack a lot of things, it becomes a hassle to carry them around.
If you want to leave it on, you will need to provide a separate Key.
(This is a different product than the photo you posted.)
KIJIMA:KIJIMA Hell Lock Wire]
https://www.webike.net/sd/22761387/
[ABUS aBus 145-4D20
(Not available on Webike)
In addition, the FastenerTag is in the way of installing the Number lock.
Replaced with another PullTag.
Furthermore, since it is a fabric product, we also sprayed it with 3M UV CutWaterproofSpray to prevent color fading.
I spent a lot of time and effort, but I am generally satisfied.
If you use it for MT-09, the helmet lock is on the Left Side.
Installation on the Right Side is relatively easy.
I also purchased the Large type in a different size and installed it on the Left Side.
I would like to buy a Bracket for MT-09SP and relocate the Helmet lock.
KIJIMA relocation Kit is required.
I like the side view, but from directly behind the car body and
The space between the Bag has become a bit delicate.
I think it would look best used in a REBELSeries.
It is easy to use and Simple Design, so it is recommended for other car models.
Helpful?
New Custom Articles
