This lever guard screams quality. The machining is clean, the finish is top-notch, and it fits my bike perfectly. It’s not just functional — it adds a sleek, race-inspired touch to the front end. Worth every penny.Very lightweight but strong. It didn’t interfere with any controls, and installation was simple. I appreciate the attention to detail — everything from the design to the packaging reflects Yoshimura’s high standards.
View Detail
913.35 ~ NOK (13,200 JPY)
Webike Point: +132~ pt
(9.13 NOK)
Leveringsinformasjon
-
Please select product form first.
Montering
HONDA
-
CB1300SB
21-24
-
CB1300SF
21-24
-
CB1300SF
21 Φ16
-
CB1300SB
21 Φ16
Se alt
HONDA
YAMAHA
-
XMAX
22-24 *M6xΦ12.5 washer and M6 bolt (30mm) are required separately
-
CYGNUS GRYPHUS
22
-
MT-125
23 Φ16
-
MT-03
18 Φ16
Se alt
YAMAHA
SUZUKI
-
GSX-R1000
16 Φ16
-
GIXXER SF250
19-23 Φ16
-
GSX-S1000
15-21 Φ16
-
GSX-R125
18-23 M6X12.5 washer and M6 bolt (40mm) are required separately. Therefore, either Φ14 or Φ16 size can be installed.
Se alt
SUZUKI
KAWASAKI
-
Ninja650
21 Φ16
MV AGUSTA
Open Fit Model Information Table
-
F3 675
14 Φ16
-
F3 800
20
-
F3 800 RC
20 Φ16
Produktbeskrivelse under automatisk oversette av Google.
Produkt detalj
[Materiale]
・ Basisdeler: Begynner med aluminium
· Tipsarm: harpiks
[Produktinnhold]
· Aluminium base (PartsNo.697-002- * 010) 1 stk.
・ Resin Arm (PartsNo.697-002-4020) 1 stk.
· Spacer15mm (PartsNo.697-002-4030) 1 stk.
· Spacer10mm (PartsNo.697-002-0040) 1 stk.
· InnerAssy (PartsNo.697-002-4 * 50) 1 stk.
・ Ultra low head BoltM5 (PartsNo.800-795-3010) Antall: 2pc
** Aluminiumbasert *: farge nummer: 1 = rødt, 5 = skifer grå, 6 = gull
* Inner Assy * for størrelsesnummer: 4 = 1414, 6 = Φ16
* Fotografiet er et slitasjebilde.
* Bilen på bildet endrer rattet for demonstrasjonsbilen.
* Vennligst bekreft hver raseforskrift når du bruker den i et løp.
* Du må kanskje fjerne ekte indre vekt..
* Bildet er bare for referanse. Bildet kan avvike fra det faktiske produkt.
Bremsevaktbeskytter er et sikkerhetsutstyr som må monteres selv i den siste kjørreguleringen fordi den effektivt forhindrer feil i bremsen på grunn av kontakt med andre kjøretøyer etc.
-Base deler som strekker seg fra Bar End er Aluminium Cut-out, med Yoshimura-logoen Laser-gravert.
・ Emboss behandling av Yoshimura logo er utført til harpiks Arm av spissen.
・ En hybridstruktur av aluminium og harpiks sikrer både styrke og vektreduksjon.
Videre kan hver del erstattes selv om den er skadet av enhver sjanse.
· Rød, SlateColor: Grå og Gulls anodisert farge er RAN-opped.
-Line opp for Φ14 som svarer til håndtakets indre diameter 14-15,5 mm og Φ16 som tilsvarer 16-18,7 mm.
Det tilsvarer et bredt spekter av modeller.
・ Vi vedtar Vekttype Inner Deler som reduserer vibrasjonen til håndtaket.
Leveres med 1515mm (Svart anodisert) Og Φ 10mm (Sølv) Ved å kombinere Spacer kragen kan den monteres i optimal stilling uten å forstyrre spjeld- eller bremsearmen.
■ Lengde fra håndtak til armspissen kan velges fra 2 posisjon.
-Resinarmmonteringsposisjon: Kort (Lengde fra håndtak til armspiss: 120mm)
-Resin Armmonteringsposisjon: Lang (Lengde fra håndtak til armspiss: 145mm)
Forsiktighet
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Kunde anmeldelser
Reviews with image
Fits:YAMAHA YZF-R15 23 Φ16, YAMAHA YZF-R25 14-19 Φ16, YAMAHA YZF-R3 14 Φ16, SUZUKI GSX-S1000 24, YAMAHA XMAX 22-24 *M6xΦ12.5 washer and M6 bolt (30mm) are required separately
Installed on: SUZUKI GSX1000S Katana
Fits:YAMAHA YZF-R15 23 Φ16, YAMAHA YZF-R25 14-19 Φ16, YAMAHA YZF-R3 14 Φ16, SUZUKI GSX-S1000 24, YAMAHA XMAX 22-24 *M6xΦ12.5 washer and M6 bolt (30mm) are required separately
Installed on: HONDA CB400SF (Super Four)
Jun 3, 2025
Easy to install light weight and good quality feel to it.Not only to protect the brake lever also make the bike look great overall.A little expensive but worth it.
View Detail
Helpful?
Fits:YAMAHA YZF-R15 23 Φ16, YAMAHA YZF-R25 14-19 Φ16, YAMAHA YZF-R3 14 Φ16, SUZUKI GSX-S1000 24, YAMAHA XMAX 22-24 *M6xΦ12.5 washer and M6 bolt (30mm) are required separately
Installed on: HONDA Monkey 125
Mar 10, 2024
OVER RACING : Sports Riding Handlebar Kit ∅ 14
Aluminum gives points to each color. And it can also protect the brakes when the bike falls. You have to buy a clutch guard or a handle Accessory Bar Ends because it only consists of a brake guard. Installation is easy as long as it fits the size. Delivery and packaging to WeBike in a week The packaging is expensive because it only costs a great brake guard. However, the quality is high
View DetailHelpful?
Fits:YAMAHA YZF-R15 23 Φ16, YAMAHA YZF-R25 14-19 Φ16, YAMAHA YZF-R3 14 Φ16, SUZUKI GSX-S1000 24, YAMAHA XMAX 22-24 *M6xΦ12.5 washer and M6 bolt (30mm) are required separately
Installed on: HONDA CB400SF (Super Four)
Feb 20, 2024
Expensive But Good Quality Guard
I purchased this guard after the bike skidded. Although it was a minor mishap without any injuries. I damaged the brake lever and it didn't brake as smoothly as it originally did.Moving forward, I decided that if I happen to tip over the bike or have any mishaps, this brake lever guard was going to bear the brunt of the impact. When I unboxed it, the feel of it and build quality impressed me and indeed could see where the cost went to. I wanted to buy a clutch lever guard but unfortunately Yoshimura did not make them. It would have completed the look.I would recommend this product to someone who wish to protect their bike from those accidental tip over scenarios.
View Detail
Helpful?
Fits:YAMAHA YZF-R15 23 Φ16, YAMAHA YZF-R25 14-19 Φ16, YAMAHA YZF-R3 14 Φ16, SUZUKI GSX-S1000 24, YAMAHA XMAX 22-24 *M6xΦ12.5 washer and M6 bolt (30mm) are required separately
Installed on: SUZUKI GSX-R150
Jan 15, 2024
The brake lever guard looks sleek and material are of high quality expected from yoshimura. Sadly they don't make a clutch lever guard too. It would be great if they have it so it would look symmetrical on the bike.
View DetailHelpful?
New Custom Articles
