BM Continental 3 Type Φ7 / 8-inches Håndtaksstål

Hurricane HB0041B-01. Hurricane HB0349B. DAYTONA 97462

Fits:HONDA CB750 04- RC42 *Processing of switch hole required|* Required side cap (for 18mm ID), HONDA FTR223 (without side numbers) * Requires modification of the clutch cable and choke cable., HONDA CB400SF 99-07 NC39 VTEC III* requires drilling of switch hole|* requires side cap (for 18mm ID), HONDA CB400SF 99-07 NC39 VTEC II* requires drilling of switch hole|* requires side cap (for 18mm ID), HONDA CB400SF 99-07 NC39 VTEC *Processing of the switch hole is required|* Required side cap (for 18mm ID)

NO NAME

Installed on: YAMAHA MT-25

Excellent

May 27, 2024

Item ordered on 24th. Mailed on 25th. Reached Singapore on 27th. Japan efficiency . Itwm bubble wrapped and boxed. No damages .

Hurricane HB0041B-01. Hurricane HB0349B. DAYTONA 9...

Helpful?

HURRICANE BM Continental 3 Type Φ7/8-inches Handlebar Steel

NO NAME

Excellent

Nov 9, 2018

Been using this handlebar for a few months and it is much better than my previous wide handlebar. The sweep back angle and height brings the handlebar closer to my body and easier for maneuvering. The shorter length from end to end and the sweep back angle towards me makes it alot more easier for lane splitting. All in all better posture and handling for urban riding.

Helpful?

Japan User(translated)

Very Good

Nov 12, 2017

This is the limit.

Since it was 163 cm and Small handle, I felt Handlebar was a bit far and low, so I exchanged it. Harness and Wire had plenty of time, but since Brake hose was feeling Limit even at NORMAL, I searched for the range where the Large Year Position does not change and made it to this Handlebar.
Because it is a Universal Product, install mounting hole of vibration proof material Quantity : Pair (for Left and Right) Quantity Pin hole of Switch box with 2 places : Pair (for Left and Right) You need to be able to open one place at a time. The dimensions from the end and the vibration isolating material mounting hole are Quantity : 2pc. Care must be taken so that the hole position of Set is 180 degrees relationship. The position of the hole in the Switch box, after positioning the Handlebar and Lever correctly, put Pin in red and marked the Handlebar and opened it. I did not need it because it was remodeling so that the parking brake can be operated with Lever, but NORMAL also needs to open the pin hole of the bar KingBrake.
Brake hose was in a state of being sticking unless you remove what is fixed at the Upper clamp.
I thought that Grip is ahead better, but I think that it is impossible to replace Brake hose any further, because it is ABS, so I am not confident of bleeding at the time of replacement.

Helpful?

Good handlebar at a great price.

Fits:SUZUKI GRASS TRACKER 09-12 (FI car)*You can use stock side caps., SUZUKI GRASS TRACKER Big Boy -08-8(Carburetor)*Drilling of switch hole is required|*You can use stock side cap. |*It is necessary to change the direction of the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo., SUZUKI GRASS TRACKER -08 (Carburetor)*Drilling of switch holes is required. |*It is necessary to change the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.

Motopsycho

Excellent

Aug 22, 2024

I wanted a narrower lower handlebar for my SR500. This one is economical, fits great and the chrome is top quality. I will be considering the Hurricane brand from now on when shopping for handlebars.

Helpful?

I think I failed to use it on the W800

Japan User(translated)

Excellent

Apr 15, 2020

I've been using the EZ-FIT-Bar, but I just need a little more height! And greedy
I purchased this product
The quality is good with no plating irregularities and no surface scratches
400ccClass for Replacement compatible Pipe Handlebar I think the width is just right for the
However, this width seems to be narrow when it is W800 used this time, and it becomes a tight position around the shoulder
I ended up having to go back to the EZ-FIT-Bar I bought last time
Well, it's a MotorcycleParts-esque story
As for the products themselves, they manufacture and sell a wide variety of Pipe Handlebar It's only HURRICANE
Very good product quality and I would recommend it to anyone
That's why I was a little disappointed (Lol)