Frontkjede

Fits:HONDA Ape100 Type D 08-13, HONDA Ape100 02-13, HONDA Ape50Deluxe 01-07, HONDA Ape50Special 08, HONDA Ape50TypeD 08-13

Payrick wong

Installed on: HONDA Super Cub C125

Excellent

Feb 18, 2023

Sunstar front sprocket

As per manufacturer, sprocket material able to last above 10000km & more. Pricing was reasonable for good material used.Have not install yet, will see how it goes & revert later on.

Helpful?

It's changed my ride dramatically!

Fits:HONDA Ape100 Type D 08-13, HONDA Ape100 02-13, HONDA Ape50Deluxe 01-07, HONDA Ape50Special 08, HONDA Ape50TypeD 08-13

Japanese Webike user

Excellent

Sep 25, 2021

[How is it used?
I installed these on my 2015 Super Cub 110.
OEM is 14T, so I installed 15T which is one up.

Was the one you received as per Image?
As per Image
Compared to the OEM, it was about a size larger, and there was quite a difference in appearance.

Was the installation difficult?
It was my first time to replace it, but I was able to do it on my own without any problems.
Instruction Manualetc. is not particularly, but I think that even a beginner can do it quickly because it only removes and puts on the thing originally installed.

How was your experience with it?
I felt a very large effect in the driving of CUB110.
Since the speed is higher at a lower rpm than before, the load on the Engine is also reduced.
The slow start was not as bad as I had heard and the increased top speed made the bike very easy to ride.
It's been a long time since I've done a Custom and I'm glad I did.

[Included Parts:were they on?
Everything that was supposed to come with it was there.

[Was there anything that disappointed you?
I would like to make a recommendation to CUB riders.

Helpful?

SunStar 14T Front Sprocket

Fits:HONDA Ape100 Type D 08-13, HONDA Ape100 02-13, HONDA Ape50Deluxe 01-07, HONDA Ape50Special 08, HONDA Ape50TypeD 08-13

Tanya

Excellent

Apr 21, 2021

With the stock 2018 Honda Monkey 125cc engine the motorcycle would struggle with large hills in fourth gear. After some research it was suggested to either go down one tooth on the front sprocket or go up two teeth on the rear sprocket. With the front sprocket being cheaper and easier to change I went that option and the improvement was well worth it as now the motorcycle can pull up those large hills in fourth gear where in the past I would have had to shift back to third gear. The fit and finish of the product is as go as OEM do it matched up to the OEM rear sprocket and chain well. My only issue now is my speedo is no longer accurate.

Helpful?

Fits:HONDA Ape100 Type D 08-13, HONDA Ape100 02-13, HONDA Ape50Deluxe 01-07, HONDA Ape50Special 08, HONDA Ape50TypeD 08-13

Japan User(translated)

Very Good

Feb 12, 2020

DriveSprocket only

Changed front and rear Sprockets at the same time to replace the Chain I installed a MADE IN SUNSTAR Sprocket on a different motorcycle before I thought I'd make in sunstar for the CUB as well … but The Rear was not commercialized and it was Front

Because there is no hole for weight reduction, the KITACO's Sprocket that I had installed until now It weighs 88g compared to 77g and is +0.2mm thicker at 6mm It was a finished product, but the engraving was pointing at an angle

Unlike LargeEngine Displacement Volume vehicles Sprocket stuck, although Sprocket is not fixed at high Torque Remove the bolt while stepping on the rear brake After replacement, tighten the bolts with 10Nm to finish the job

It's just a shame that we couldn't have it all in MADE IN SUNSTAR before and after, because the finish of the product was so good It was

Helpful?

I chose it by Manufacturer!

Fits:HONDA Ape100 Type D 08-13, HONDA Ape100 02-13, HONDA Ape50Deluxe 01-07, HONDA Ape50Special 08, HONDA Ape50TypeD 08-13

Japan User(translated)

Excellent

Oct 12, 2019

I bought it because I have used it on a large motorcycle, so I thought that durability is not a problem My 15T is an STD, but when I installed the AXIS lab tube, the torque was lost underneath As a result, I thought I had no choice but to cover by the number of Front, and selected 14T (-1 Ding) Naturally, the Piece number of Chain is also changed? I thought it was 98Piece (STD), but I heard it was 97.5Piece, so I stayed with it I went
As for the speed, MONKEY-STD, the speed is 4km from the GPS speed, and 3km from the 1 Ding! Together, it is -7km, but in the test run, it was -9km & plusmn; 1km So, I decided to subtract 10km from Meter without putting the speed sensor kit, and to use it as a test run I don't look at Speedometer very often!