- I purchased a nut removal tool for bearing maintenance of Stem, OEM product is expensive and not used often.The Torque wrench can be attached to the end of the Torque wrench, so the Torque is large an...Les mer
- I used it to replace the stem bearing on a SEROW250.I think the hook is a little shallow, but it worked fine.Les mer
- Used once every 6 months to tighten Stem.Some people use a slotted screwdriver to tighten it, but I bought it because I don't want to do that on a large motorcycle.It is also good to be able to manage...Les mer
- I used it to check the Torque when I replaced the Stem bearing.The Torque wrench is used to set the Torque value, so you can go Large without any experience.It's also a good way to see how much force ...Les mer
- This is the part where you want to use the Torque wrench properly.I bought it.I'll have to do the math to set up the tightening Torque.It's very nice to be able to tighten it without worry!If you are ...Les mer
- It is essential for maintenance around Stem.The service manual states You'll use all the springs, you'll pull the torques, you'll get rid of the torques. but it was too much trouble.With this Socket, ...Les mer
- Inexpensive but easy to use; if you want to torque-manage Stem, use the torque wrench Quantity in 90-degrees for:You don't have to do complicated torque conversions because you can set itLes mer
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING