- I used it with License Plate LightWiring.For WR, the Brown wire on the body side was Plus and the Black wire was Minus.I used it in connection with Y's Gear's Fender Eliminator Kit.It can be connected...Les mer
- Blinker connector for turn signals from Daytona. I bought myself on YAMAHA YZF R1 RN12 05. Because I have a motorcycle of the American version, there is a turn signal connector for three contacts. I...Les mer
- The DAYTONA Connectors are useful for DIY processingThis is also used to replace the MT-07's Blinker with an LED oneIt's also important to be able to return to the original state, and most importantly...Les mer
- I want to share a review of the purchased product. I bought 1 pair of connectors to repair the damaged wiring on the Yamaha R1. Installation was quick and without any difficulties. The quality of the ...Les mer
- Отличное качество, много упаковки. Мне нравиться. Спасибо :)
Excellent quality, lots of packing. I like that. Thanks :)Les mer - We used it for processing Blinker's Connector so that it can be restoredWe can use it without any problemSince the diameter of the LED Blinker is thin, I made crimping + soldering just in caseLes mer
- I bought it because it was necessary for License Plate Light as I made WR 250X a Fender Eliminator.Even if myself who is not good at fiddling with the electrical system, I gathered the information of ...Les mer
- With this, you can install a commercially available LED License Plate Lamp.Ripping the Wiring's Rubber and inserting the middle line between the Gold genres at the tip and inserting it.(By the way...Les mer
- [Webike Monitor] It was used at the time of Blinker exchange of Yamaha vehicle.
Although it could also be used could cut wiring currently attached to the car body, it purchased in order to enable it ...Les mer - It is very a favorite in a user friendly manner.
Since it is the same as the NORMAL, even if it carries out part exchange, it can return immediately.
Les mer - It was an Exactly in the form as it is pure.
Les mer - It is the same type as the connector currently used for the number LGT of WR250. It is a difficulty that there is no spare plug and failure is not allowed. As long as thinking a price, 1 ir 2 pieces s...Les mer
- It used for extending a Blinker.
Since those who Used can return to origin finely in the future if it considers turning off the wiring of a pure Blinker although the price is higher, I think that it ...Les mer - In blinker exchange of a yamaha vehicle, they are necessaries (individually). It was used for number light exchange of WR250 this time. To the thing which should be just cheap to a slight degree --Les mer
- When LED-izing the blinker (PURONTO) of SV1000S, in order to enable it to return on a pure blinker simply, this product which is a same-shaped connector was used. It is satisfactory at all.Les mer
- YZF-R1 It attached to 08. It is found useful when changing a front blinker. The time and effort exchanged when the components along which it does not pass in an automobile inspection are attached, sin...Les mer
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING