204.23 NOK
(2,841 JPY)
5 (1 alle omtaler)
rating breakdown
5 Stars |
|
1 |
4 Stars |
|
0 |
3 Stars |
|
0 |
2 Stars |
|
0 |
1 Stars |
|
0 |
Excellent
Severe trouble can be avoided with DIYMaintenance!<Situation>
Used in a new UCEEngine vehicle of Royal En Field.
EGOil's Drain was missing when he bought a second-hand car.
I used cheat dumas and used it, but leak leaked by the third Oil exchange.
<In consideration for measures>
There is no Oil pan in EG so there is no repair?
Again E-sert / I'd like to ask Recoril for Motorcycle shop, etc?.
<Buy>
Perhaps you treated it with Webike?
A ○ It was a high shipping cost to be taken by zon.
M14-1. Drain of 25 Pitch. 1. If you can use 5Pitch and it is in the product information of Webike, obey.
Please note that Instruction Manual etc. are not attached to the product at all.
<Report of actual work>
1) First, thread cutting operation (Without Gasket).
Stop Spanner and Glasses and use Socket's piece (Straight while hitting the top of the piece to the Engine) Screw into.
2) Due to different Pitch, there was a hardy response, and Wrench was necessary on the way.
To finalize it, do not overdo it.
3) Flow a small amount of Oil and discharge the facet / Did you leave?.
4) Move with Gasket. → Insert Oil.
5) 24 hours have elapsed, but 1 drop has not leaked.
<Remarks>
In short: Tapping screw?
There seems to be some products that process E-sert by yourself, but they are afraid of failure. We are satisfied with Kore enough as us.
Fiber processing Gasket will change every time. There appears to be made by DAYTONA.
Most Viewed Reviews Of SANKEN Oil Drain Bolt
Excellent
It is not aluminum and will not be lickedI started to change the oil on my Motorcycle by myself, and I'm trying to get as much of the iron filings inside as possible I purchased these because I wanted to remove them The first thing I purchased was a Drain bolt with a magnet of Aluminum I replaced it with this one after a period of time because I feared Nut would lick it if it was too much This is the strength of the magnet, but the Scissors will lift up It is a bit reassuring because the Material is not aluminum It is a little early days since I replaced it, but there is no problemView Detail
Excellent
Easily repairable if Female is AluminumIt is LC4 series of KTM. Drain bolt is primarily manual, but somehow Screw has run out. It is this product that I found at where I was at a loss. I just happened to be the same as the original Pitch, so I thought it would be nice to put out unnecessary cutting powder and purchased it. After work, Screw diameter becomes M13.
Easy task. Bolt is applied to the current Screw hole, and Screw is carefully cut at the Taper section. Since the fragments of the part already cut off will come out, remove them even if they are screwed in slightly, and do not push the cutting powder as much as possible.
This Bolt is about 6 mm longer than the original Drain bolt, but it was able to fit the root without problems without bending.
As a future task, is it possible to obtain a replacement Packing at the next Oil change. Because there was a Kit of the same purpose as this product in Straight, I 'm thinking to use M13's copper Washer as part of it.View Detail
Excellent
Drain bolt of CB 400 SF ...Oil When I exchanged Screw mountain on the Oil pan side, it crashed,
"Do you want to change Oil pan?" If I thought I found this.
With an Oil pan exchange it costs about 10,000 yen (Exchange by yourself) It costs less than 2,000 yen!
Carefully turn it so that Bolt does not enter diagonally,
In order to extract chips by extracting Bolt when entering to a certain extent
Pour in Oil and repeat it..
It is useful as it can be done as it is Drain bolt!
Let Torque management be proper ...View Detail
Very Good
Since the talk will often be heard if the Sludge is contained in waste oil, if it is right, can Sludges be collected with this Bolt?
It uses by whether when collected, it is good for an Engine, and an Oil can also be used somewhat long, and trial andSince the talk will often be heard if the Sludge is contained in waste oil, if it is right, can Sludges be collected with this Bolt?
It uses by whether when collected, it is good for an Engine, and an Oil can also be used somewhat long, and trial and error.When Engine oils are exchanged at the
end of the year, Bolts are exchanged, and it is observation of progress till the next exchange.Although it sees from
Level window and is confirming whether the dirt of the Oil is affected, change is seldom seen.If the Sludge can be taken, I am glad also at
.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING