371.86 NOK
(5,173 JPY)
355.69~ NOK
(4,948 JPY)
(4% OFF)
4 (8 alle omtaler)
Very Good
There is convenienceI attached it to BirdCity 155, but how to wrap is special ? The setting should be 1500 to 1700. line (code) Is short.
Reviews For KOSO Super Slim Style RPM Meter From Other Webike User
Excellent
koso super slim style rpm metermay i installed on my xr250motard. this koso rpm meter easy to install, small waterproof digital display unit as a very smart locking, i like very much. thanks we bike.View Detail
Very Good
Anyway, I chose Digital because it's cheap and easy to readI was looking for an inexpensive and easy to read Tachometer, and when I looked for it, I found koso (KN Planning) I bought a Digital meter from Pulse, which is an IGCoil wound Wiring The Plus line has a blinker relay on the back of the headlight in the case of JA44 I used ETC Antenna Bracket for the installation of meter part I bought it and installed it, and it can only display in 100 rpm increments, but it has a warning of A shift is light The speed can be set, so I think the cost is goodView Detail
Excellent
Recommendations for Motorcycle without TachometerI got an immobile RMX250S as SecondMotorcycle I fixed it to the point that it works, but because there is no Tachometer, I changed Idling to Manual value I bought it because I don't know the number of revolutions at the end of the engine I used the ETC Antenna Bracket for the display body and installed it on the Indicator Plus is Horn and GRAND branches from Blinker The signal line was wrapped around the Plug cord 14 turns, and it moved without trouble Because it is Digital, the number of revolutions moves if Engine is done even with Battery reply Up and down may blur the numbers, but it's not hard to see You can use the Engine nowView Detail
Very Good
It is X10 display, but ...It is X10 display of 4 digit display part.
If it is 2000 RPM, 200 will be displayed.
However, the smallest unit to pick up the revolution is 100 RPM.
If you can gradually open Axel from 2000 RPM, the display will change from 210 → 220 → 230 ... instead of 200 → 201 → 202.
In other words, the display of the most Right Side is fixed at 0.
There is no problem in grasping the number of revolutions to Large miscellaneous, but it may be a bit usable as Carburetor's Setup.
I will not write it, so I will write it down..
And, depending on the angle of attachment, it becomes hard to see by reflection.
Let's adjust it to an easy-to-see angle.View Detail
Most Viewed Reviews Of KOSO Multifunctional Tachometer / Speedometer
Excellent
koso super slim style rpm metermay i installed on my xr250motard. this koso rpm meter easy to install, small waterproof digital display unit as a very smart locking, i like very much. thanks we bike.View Detail
Very Good
Anyway, I chose Digital because it's cheap and easy to readI was looking for an inexpensive and easy to read Tachometer, and when I looked for it, I found koso (KN Planning) I bought a Digital meter from Pulse, which is an IGCoil wound Wiring The Plus line has a blinker relay on the back of the headlight in the case of JA44 I used ETC Antenna Bracket for the installation of meter part I bought it and installed it, and it can only display in 100 rpm increments, but it has a warning of A shift is light The speed can be set, so I think the cost is goodView Detail
Excellent
Recommendations for Motorcycle without TachometerI got an immobile RMX250S as SecondMotorcycle I fixed it to the point that it works, but because there is no Tachometer, I changed Idling to Manual value I bought it because I don't know the number of revolutions at the end of the engine I used the ETC Antenna Bracket for the display body and installed it on the Indicator Plus is Horn and GRAND branches from Blinker The signal line was wrapped around the Plug cord 14 turns, and it moved without trouble Because it is Digital, the number of revolutions moves if Engine is done even with Battery reply Up and down may blur the numbers, but it's not hard to see You can use the Engine nowView Detail
Very Good
It is X10 display, but ...It is X10 display of 4 digit display part.
If it is 2000 RPM, 200 will be displayed.
However, the smallest unit to pick up the revolution is 100 RPM.
If you can gradually open Axel from 2000 RPM, the display will change from 210 → 220 → 230 ... instead of 200 → 201 → 202.
In other words, the display of the most Right Side is fixed at 0.
There is no problem in grasping the number of revolutions to Large miscellaneous, but it may be a bit usable as Carburetor's Setup.
I will not write it, so I will write it down..
And, depending on the angle of attachment, it becomes hard to see by reflection.
Let's adjust it to an easy-to-see angle.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING