This is a replacement from Jet Helmet (No Brand).
I'm new to motorcycles, so this may not be very helpful to you.
I would like to write an Impression of Z-7.
Size:57cm around the head. The bowl of the head is wide for a girl, but the face is small.
I went to the MotorcycleParts Shop in the neighborhood to try on a lot of clothes and then went to We-Big.
I bought it ^^^;
The Cheek Pad, which has been described by Z-7 Impressions as being a bit harsh.
When you wear it, you can't deny the feeling of being squeezed, but there is a sense of security that it is fixed firmly in place.
I didn't think it was too hard, but for the average guy it's just a matter of time before he gets used to it.
It may be cramped.
Since it is hot, all the vent holes were opened and used.
Still, it felt much quieter than the Jet Helmet.
Since it is 125cc, it is used only on general roads. I have not tried it on highways.
By the way, I didn't use the Chin curtain because it was hot.
Personally, I haven't felt any inconvenience at all so far without it.
It is the Helmet in of PCX(JF81).
But it's rather forced.
The feel of it when I put it in Helmet in was similar to the CUBT 3, as I recall.
Even when the Helmet in Hook is fitted, the Seat feels slightly raised.
Storing it in this condition for too long would put a lot of strain on the Helmet in hooks and
LargeIf it rains, water can get into the Helmet in.
Also, it's not going to be good for the Helmet if it's pushed and stored all the way down.
Unavoidably, I re-installed the rear box that had been removed once and stored it there.
I think it's good if you are used to it, but it's always been a one-touch lock until now.
So I didn't get used to the D Ring, so I bought and installed the Hook, which can be attached with the One-Touch.
I managed to save time on the wearer!
If it had originally rocked the One-touch, it would have been a perfect score.
The Pin Lock Seat... I had a little trouble installing it because I am not used to it, but once it is installed, it is very easy to install.
I was surprised that it hardly fogged up. By the way, I spent about 30 minutes in my room trying it on, but
I was wondering if the Breath Guard would have any effect.
Not to mention the shape and weight, it's so cool!
It's hard to look impatient even if you wear it because it doesn't have a Large size.
Even if you switch from the light Jet Helmet, you won't get tired because it's so heavy that it's hard to feel uncomfortable.
There are many criteria for choosing a Helmet, but ARAI, SHOEI, and CUBT will kill you.
At a time when I was unsure of what to do. Pinch me, I like the pattern. If you choose the
It's going to be so much fun! And an advise from someone I know.
So I took the plunge and chose this one that I fell in love with at first sight.
I was actually going to get the Simple Plain, but I'm really glad I did.
Graphic is beautiful. The real thing is nicer than the picture.
Since the surface is smooth, it doesn't seem to be difficult to clean.
And a pure Shield, sold separately. (FireOrange) if you add a
It turned out even better than I expected!
All I can say is that I'm satisfied with Large.
I went over the budget, but I was able to buy a Chin curtain, Pin Lock Seat and
I'm glad to see that the Breath guard came with it.
Thanks to Shop's neat warranty, solid support and quick shipping.
I tried to upload the image, but I couldn't get a clearer picture of myself in the Shield.
I was so embarrassed that I gave up on it. Sorry ^^^;
I've been an ARAI fan, and I was worried about RapideNEO until the end.
When I tried it on, the Rapide felt cramped and suffocating at the mouth, so I finally settled on the Z-7, but the ZORKGraphic is the best!
At first glance, it looks flashy, but I like it because it has a 90s retro feel to it.
I'm very happy with the interior and the cap design, as expected of SHOEI!View Detail
Comparison between Arai's RAPIDE-IR and S Size.
Good points:light, hat body (Appearance.) Small size and Pin Lock Seat are included as standard
The bad:With a motorcycle leaning forward, the front of the bike (Distant.) Visibility is No, thank you. Sorry.
Cheek pad sold separately, not adjustable.
In the case of RAPIDE-IR, the Cushion of Cheek pad can be removed by one level.
If the Z-7 was tight, the thin, separately sold (Loose.) You need a Cheek pad.
Six pairs of glasses I own. (Both Cell and METAL are available.) RAPIDE-IR can be easily detached.
The Z-7 just can't seem to get into a good position.
The string can run into a structure on the back of the head, or the string can run into Quantity:Pair (for Left and Right) Lens position on the
The glasses are pressed against my face. (Lens hits the lashes.) Such
I thought it would be nice to have the Pin Lock Seat as a standard accessory.
Installation is cumbersome, visibility is slightly worse than the Shield, and fingerprints, dust, and hairs cannot be eliminated.
The Pin Lock Seat is highly rated in many places, but wouldn't it be better to apply anti-fog coating each time …?
It's not a good fit for each manufacturer or model, so you need to actually install it.
I bought Z-7 because of its lightness and parenthesis, but I also continue to use RAPIDE-IR.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING