I used to use another Manufacturer, but it broke, so I bought this one. I feel it is easy to kick.
Frequently Asked Items
What made you decide to buy?
When we installed Takegawa's SilentOval Exhaust System on the DAX, we were able to get a good look at the following the..
I needed a Kick pedal to escape outside
Therefore, the reliability of KITACO as a manufacturer and GCraft designation ( I chose it because (I don't use Rear Sets...)
How was your experience with it?
The high quality of the Plating and the precision with which the Pedal can be inserted and removed with ease I love it
There is no contact with the Clutch cover when it is folded
You don't have to worry about getting your pedal in and out
Was the installation difficult?
Simply remove the Screw1 pc, replace it, and tighten it up
【Please tell me the installation point and hang】
You have to make sure you remember the angle of the OEM Kick pedal's installation and make sure you have that angle in mind
It is desirable to have a preserved installation
[Was the Instruction Manual easy to understand?
It wasn't in there, but I don't think it's necessary
[Included Parts:were they on?
It comes with a Rubber for Pedal, but as much as possible because the Plating is beautiful
It's unused because I wanted to show you the Plating part
[Others]
Clearance with Clutch cover is exquisite
In addition, it does not stick out as much as OEMKICK, so there is no interference with the Right foot
Position is better
important item
[Was there anything that disappointed you?
Not particularly
Do you have any wishes or improvements you would like to make for the Manufacturer?
If you can, please keep the price a little lower
[Do you have any products to compare it to?
Takegawa Steel Forging Kick Starter Arm
KITACO was better at the time of purchase
View Detail
The KICK that came with the OEM was falling apart, so I replaced it for looks! I chose KITACO, which mainly carries 4MINIParts! I chose KITACO, which mainly deals in 4MINIParts! I'm grateful to KITACO for their services in addition to this one, and their parties are cheap and The performance is good, and I think it has very good cost performance
Installation itself is just a matter of removing and installing the OEM KICK
I just think you should be careful about the mounting angle If you mount it at a weird angle, it's going to be terribly difficult to KICK & interfere somewhere else So, I installed it to match the angle of the original KICK and adjusted the angle from there I think you should
Once the angle is set, all you have to do is kick it, and you can use it with no problem It is No wonder it's so nice to see on Polished!
The vehicle is stored outside, not in Garage etc The car is stored outside and not in Garage
I don't think it's going to make it any easier to do special KICKs, but as a custom looker, I'm not sure it's going to make it any easier I'm happy with myself!
As you write, it's easy to install, so I think it's safe for beginners!View Detail
I use it for GCraft's Rear Sets
When installing GCraftRear Sets, you must use this KICK, otherwise the other Kicks will not work it hits the footpeg directlyView Detail
When it was set to YOSHIMURA's Exhaust System, NORMAL's Kick pedal hit Exhaust System, so we exchanged together. I used it well without trouble making.View Detail
Originally I used ZStyleShortKICK of Mukawa river.
By using GCraft's Rear Sets this time, I will interfere with footpeg when I step in KICK.
It is written that GCraft's Rear Sets also recommend using this KICK.
The first thing I bought and installed it was that in my case the Exhaust System was up type and could not be installed according to the escape part of the spectra.
If installed together, it will interfere with the Exhaust System.
Now when assembling at a forward angle like the photo, the side of the speckle is popping out so it interferes when stored.
No matter how it is installed, this Up Exhaust System interferes.
I was able to process it and process it to escape a little outside when storing it and it was able to be used without problems.
I think that things are well done.
It's light for a long time.
I knew it by cutting, but it is not iron but iron.
I think that there are also thickness and synthesis is high.
The only disappointment is that this price is too expensive.
Plating is 1000 yen Plus.
I would like to make it cheaper.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING