410.24~ NOK
(5,749 JPY)
4.3 (6 alle omtaler)
Excellent
Cheap insuranceMount feels very sturdy, mounts up super easy, . I'm stoked on the look and the protection.If you can take your front tire off, then you should have no issues installing this thing. It looks great and gets the job done. Once the mounting kit is on, cover replacement should be really easy if needed. Mine has taken some dings, but has held up well and still looks great.I'd recommend a lil loctite on the bolts that hold the plastic on.
Reviews For ACERBIS X-bremse foran skivedeksel From Other Webike User
Excellent
Great piece of mind for a minimal price.This is definitely the way to go if your looking to protect that brake rotor and also caliper from rocks, bushes, etc...Looks good as serves a purpose. In the majority of the terrain we ride is very rocky, it has saved my Disc more than a few times. this little piece of mind is priceless, and well worth the money.Looks really good.10 of 10 would recommend. Hop webike and get you one.View Detail
Very Good
Material:Plastic but durableI used it for about 5 years.
I bought a new Mount and used it on the next vehicle I switched to.
I think that durability is high because there is no large-scale damage though there is whitening by Wound and mud on the surface as expected though I do not use it so hard.
When you install the Disk guard, the benefit of the protection of Caliper as well as Brake Disc is large. The Caliper piston returns to ScauperScauper by finger even if Seal is not changed. I think it is protecting from mud and water.
By the way, the OEMACERBIS Mount is a little annoying because the Dust Seal on the Wheel often falls off when removing and installing the tire even if it is new. The quality is also a little low.
The ZETA mounting kit is totally pimped out.
The texture of the aluminum processing is higher than the one made by ZETA, and the rib of the Wheel Collar is effective. The photo shows the Mount which has been used for 5 years (90h), but there is almost no deterioration.
By the way, the Mount of ACERBIS is a structure that the collar part and the Mount part become a separate body, and the Guard moves round and round before tightening, but it can be fixed by tightening the Wheel nut.
ZETA is all one piece structure, so you can adjust the position by moving the mount and tighten the wheel nut to fix it.
Personally, I think the ZETA is better serviced with the Mount as well.
Please refer to this page when you purchase Guard and Mount separately.View Detail
Very Good
Mounting with ZETAMountWell originally
Installation Manufacturer Although it would be better to arrange
It is installation using ZETAMount on account of the delivery date.
Completely added work etc etc. It is possible to install without need.
From ZETA's thing
- Feeling that it seems to cool down is good
- FBrake Caliper seems to protect the lower part
- Manufacturer logo is entered at One point and there is no sense of noiseliness
So I selected a cotch
I would like to hopefully guard the disc firmly.
Incidentally
The color of White is slightly blue.
It does not match with White of WR 250 R
It matches White of ZETA's Hand guard.
It matches White of Side cowl of ZERO-G.
Why is not it?View Detail
Very Good
I felt that the disc was protected slightly ♪ Relieved ♪Front Disc is damaged by hitting when falling, mud - Cover to protect from stepping stone etc.
Photo (Right) Like ___ ___ ___ ___ ___ 0
Because it is not a hard drive to a huge rock etc, comparison of defense power is difficult - -
I turned around at Enduro and threw out Motorcycle and threw it safely (Lol)
FOR JAPAN MODEL Regardless of the outside, many Enduro top riders also love Disc Cover so many people think that it was happy Yo (ω ω - )
By the way, I am Color "White" I bought it, but it looks somewhat like Blue right?
Do not bother with this ww
* For installation, ACERBIS's exclusive Mount Kit (ProductNo : AC-20-080 WRR) is required. Do not forget!View Detail
Very Good
It is not uncomfortable at high speed.Something strange at high speed etc. I did not do it.. I think that cooling is also problematic if such a hole is opened. (The company Z has little hole in both new and old). The color is also beautiful. Off does not run almost, but it is cool and it is coolest.View Detail
Most Viewed Reviews Of ACERBIS Disk Guard
Excellent
Great piece of mind for a minimal price.This is definitely the way to go if your looking to protect that brake rotor and also caliper from rocks, bushes, etc...Looks good as serves a purpose. In the majority of the terrain we ride is very rocky, it has saved my Disc more than a few times. this little piece of mind is priceless, and well worth the money.Looks really good.10 of 10 would recommend. Hop webike and get you one.View Detail
Very Good
Material:Plastic but durableI used it for about 5 years.
I bought a new Mount and used it on the next vehicle I switched to.
I think that durability is high because there is no large-scale damage though there is whitening by Wound and mud on the surface as expected though I do not use it so hard.
When you install the Disk guard, the benefit of the protection of Caliper as well as Brake Disc is large. The Caliper piston returns to ScauperScauper by finger even if Seal is not changed. I think it is protecting from mud and water.
By the way, the OEMACERBIS Mount is a little annoying because the Dust Seal on the Wheel often falls off when removing and installing the tire even if it is new. The quality is also a little low.
The ZETA mounting kit is totally pimped out.
The texture of the aluminum processing is higher than the one made by ZETA, and the rib of the Wheel Collar is effective. The photo shows the Mount which has been used for 5 years (90h), but there is almost no deterioration.
By the way, the Mount of ACERBIS is a structure that the collar part and the Mount part become a separate body, and the Guard moves round and round before tightening, but it can be fixed by tightening the Wheel nut.
ZETA is all one piece structure, so you can adjust the position by moving the mount and tighten the wheel nut to fix it.
Personally, I think the ZETA is better serviced with the Mount as well.
Please refer to this page when you purchase Guard and Mount separately.View Detail
Very Good
Mounting with ZETAMountWell originally
Installation Manufacturer Although it would be better to arrange
It is installation using ZETAMount on account of the delivery date.
Completely added work etc etc. It is possible to install without need.
From ZETA's thing
- Feeling that it seems to cool down is good
- FBrake Caliper seems to protect the lower part
- Manufacturer logo is entered at One point and there is no sense of noiseliness
So I selected a cotch
I would like to hopefully guard the disc firmly.
Incidentally
The color of White is slightly blue.
It does not match with White of WR 250 R
It matches White of ZETA's Hand guard.
It matches White of Side cowl of ZERO-G.
Why is not it?View Detail
Very Good
I felt that the disc was protected slightly ♪ Relieved ♪Front Disc is damaged by hitting when falling, mud - Cover to protect from stepping stone etc.
Photo (Right) Like ___ ___ ___ ___ ___ 0
Because it is not a hard drive to a huge rock etc, comparison of defense power is difficult - -
I turned around at Enduro and threw out Motorcycle and threw it safely (Lol)
FOR JAPAN MODEL Regardless of the outside, many Enduro top riders also love Disc Cover so many people think that it was happy Yo (ω ω - )
By the way, I am Color "White" I bought it, but it looks somewhat like Blue right?
Do not bother with this ww
* For installation, ACERBIS's exclusive Mount Kit (ProductNo : AC-20-080 WRR) is required. Do not forget!View Detail
Very Good
It is not uncomfortable at high speed.Something strange at high speed etc. I did not do it.. I think that cooling is also problematic if such a hole is opened. (The company Z has little hole in both new and old). The color is also beautiful. Off does not run almost, but it is cool and it is coolest.View Detail
Other Reviews From NO NAME
Very Good
Priced right and no damage to the adjuster.Is a great tool to adjust the rear shock compared to using a screw driver and a hammer.It would have been extremely difficult and time consuming to preload springs without this tool.Recommend getting one to add to your collection.very handy tool, very good price.add;fits with exhaust clamps,triple tree nuts of old 50-250cc motorcycles View Detail
Very Good
Great safety and looks productnice and shiny replacement for the old tattered cloth renthal pad i had for years.Pad fits well on ktm. I don't love the graphics but needed it to replace the one on the bike that was falling apart. Pretty stiff foam too. I'm not sure I want my face to hit it.I wanted to buy an original product instead of a poor quality fake.Price seems high for what it is.View Detail
Very Good
Great product, great upgradeMalfunctioned stock caliper on a so this was a better option to go than OEM.I didn't expect much when I bought it.First try was in the long ride and I wouldn't spend this much money for the extra performance if I didn't have to.That was a game changer, especially on steep downhills.Brake precision and overall performance is far better. Braking at speeds above 100km\h made a big difference.braking distance is now noticeably shorter.Worth every penny. Also looks better on the bike than I expected.View Detail
Very Good
A must have tool for any tool box.This tool comes in handy for all my little jobs and some big ones.The depth of insertion of the socket allows the optional setting of fixed and pivoting.it can be used as an extension bar.It is pretty sturdy and well made.The Japanese quality shines through, the feel in the hand is incredible. It's quick to use the handle is large enough to get a good amount of torque on the screw or nut being tightened. so far the tool has been very durable and not let me down while being used.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING