I have always played around with my reservoirs and this was another option to try. From a well respected brand and very well made part. The 90 degree angle makes fitting the brake lines easy and hassle free. Easy to mount with a butterfly bracket. Very sturdy tank which comes with a bolt down cap and removeable diaphragm. By the way, you can still see the fluid level even though this is a moke colour.View Detail

I had always wanted to upgrade teh oem Yamaha rear reservoir for something a lottle different and wanted to keep with Brembo so this was a purchase I must make. I also wanted a smoke colour as I think they look better and do not cloud like some of the white/clear ones do. It was not hard to find the tanks on Webike as you just have to type in Brembo and search down. Easy really. Even though I was always going to put a tank cover over this, I would know that is was smoked and to my liking. The cost of this was really good and almost the same as a standard clear one anyway from Webike so why not. My order was delivered by Fedex as I do like how they operate. All was packaged really well from Webike which I do love. The tank came in a Brembo packet. This finish is a really good looking tank. There is no distortion to the look, the smoke colour is dark but not too dark not to see your fluid levels. Fits straight on and no problems. I did not even have to bleed the rear as I clamped the hose before removing the old one. I love itView Detail

This an upgrade I did a while ago but had not gotten around to doing a review on the Smoke reservoir kit.I have had a lot of experience with Bremo products and for this reason, I decided to purchase the Smok kit. It is a little easier on the eye and ou can see the fluid clearly as the view is not frosted.The price from Webike is exceptional, I had to wait a while before I could even order this kit as the Smoke was not in stock. Didn't take long for Webike to get the stock so I ordered whilst I could.The shipping method I used was EMS fast. They just do a great job in getting your order to you in record time, I believe this was a 4 day turnaround from Japan to the UK. You can't get much better than that.I ordered other parts with this and that also cut down on the shipping cost. Everything in my order was packed really well and although there was little space in the outer bax, Webike took the liberty to fill in any empty space with additional padding.This kit really is a goreous piece of work. The bracket is super clean, machined very well. There is literally everything you need to fit this kit to your bike as long as you have space to put one. I did have to get a new brake line made up but that was purely down to me not liking the bend on the line when this was fitted. It didn't really need changing but my OCD meant it just didn't suit me.This comes with all the clips, bolts, washers and the anti vibration rubber. It does look wicked once fitted. Works really well and teh brake feels a bit crisper although that might also have a lot to do with the fact I changed out the master cylinder at the same time.Anyway, I am very pleased with the result. Thank you Webike for the great effort you put into each order, keep it upView Detail

The brake side reservoir was also needed for a customer. The one they had fitted was a cheap after market reservoir. It might have looked good but it failed miserably and leaked a fair amount on the bike's fuel tank fairing.I already had this in my basket and matched it from Brembo website. These are perfect upgraces to the stock reservoirs on a lot of older bikes. The cost of the reservoir was very good, better than I could source locally in the UK. I already had other parts in my Webike basket and with about 8 other items of varying size I used EMS fast. The cost of this service was really good value. All arrived at my door in 4 days flat. The outer box was already sealed by Webike warehouse so nothing coud be lost from the box. All the items in the order arrived in perfect condition as expected.This reservoir is a really good looking part, even though it is white and pretty opaque, not totally clear but enough to see the fluid level inside. I have fitted these to a lot of older model bikes that were in desparate need of a new reservoir. Brembo manufacture these for a universal fitting and they really are. You may need to get a different banjo for the exising brake line as the outlet doesn't always match with your existing one.It is a nice touch having a screw on cap and then bolted down. The more security the better when it comes to brakes. Fitted to the existing braket the customer had so an easy installation. All filled, bled and done in less than an hour. ABS for you >.View Detail

My rear reservoir tank looked a little old and I wanted to get a few of these for other bikes than I would normally buy for.I went for the smoke colour as this is the same colour as I already have on my from master cylinder. You have to match right.The price of these reservoirs is excellent, much cheaper than I could get from the UK. I ordered 4, I already had a few other Brembo reservoirs and the kits they have so the shipping was cut dramatically between all the parts. The method I used for this order was EMS fast. They really are fast too, from placing my order to the order being delivered directly to me was 4 days. This courier was also a lot cheaper than Fedex who I used to use.All the parts in the order were well packed, most came in their individual packets and teh box was filled out with bubble wrap and air pockets so nothing could move around too much.The reservoir upon receipt looks really cool. So much better than the plain old white version and actually clear to see the fluid within. Very nice. The screw cap was firm but not too much, you don't really want a loose cap or something bad will happen.I already had the hardware to fit this reservoir ready to go. All fitted in about 10 minutes and that was even clamping the brake line.I have to say, I am very happy that Webike are authorised Brembo distributors and this means I can source more of the Brembo parts I need from one place. Great work Webike, thanks a lot.View Detail

One of the most annoying things to me is parts that have been badly treated and bikes the same. This bike, although not too old was in a sorry stae and needed some tlc. This bracket 4 was damaged and needed to be replaced. The part was easy to find using the methods I usually use, Webike help section and cross referencing Yamaha schematics. The price for this brack and another part for the bike was really good and better than I could source locally. Although, saying that, this part was actually not available at the time I needed it locally. I had my order shipped using EMS and all the parts arrived promptly in 5 days from shipping. The bracket is well made and the welds are very clean and precise. The bracket is painted in a nice satin black which looks nice. A nice and easy swap out and the bike is better than it was. Thanks Webike.View Detail

I don't usually buy these OEM as parts as they are just tie wraps essentially but the customer wanted all standard so this is what they wanted. Finding the correct clamp was not hard as I search Webike help section and use Yamaha schematics to cross reference. A few other part in my order for this bike and shipped via EMS. I get me orders using EMS in 5 days which I assume is a standard of theirs as that is the timeframe I always work with. Very well packaged products and no damage in transit. The also came in the regular Yamaha packet. The clamp is a good part but again, nothing too special. Works exactly as it should so there are no complaints. Cheap part, oem standard, very pleased. Thanks Webike. View Detail

I have to change these regularly on this age of YZF-R1 due to standard deterioration. It is not a fault of Yamah but over time, these things start to perish. This was the case here. An o-ring that I have purchased before but that cost a lot more than I could get from Webike. Brilliant. Easy to find using the Yamaha schematics. This o-ring does also fit a lot of models with this same style oil cooler. Shipped and delivered in 5 days using EMS as the courier. The o-ring came in the Yamaha packet and was kept flat so there was no damage. The o-ring is a pretty big one as far as o-rings go so need to be a bit delicate when opening the packet and handling it. I find these large o-rings have a lot of flex but do seem to be wuite strong for the width. I added a little oil before install to help with the seal to the oil cooler. Great product, cheap and did the job I needed it to. Thanks Webike. View Detail

ANother set of top quality R&G crash protectors but this time for a bike I have never worked on before. These were purchased for a Honda CB500X 2016. I did look at other brands but for the price and what I have witnessed from R&G before, we went for these. The part numbers for the CB500X 2016 do only fit a couple of models, this you will have to check for yourselves. I got the correct part number from R&G anyway. The cost was reasonable so this was also a great benefit.The shipping courier I went for was EMS fast service. They delivery my orders within 5 days and I have never had it take any longer than that. From Japan to the UK, that's just brilliant. The shipping was also spread out over a few items which meant it was great value.Upon receipt of my order, the outer box was sealed with tape and nothing could escape during transit, not even the gaskets which are flat could be lost.All the item in the box were packed very well and bubble wrap was also added for additional security. Everything was 100% perfect.The material of these bobbins I am not sure of but they really do take the speed of if you have an accident. The aero shape is really retro looking which also adds the curves of the CB500X 2016.These Aero bobbins are pretty easy to fit but just do one side at a time and get some support for the engine as when you remove each bolt, there is a small risk that the emgine will also move. Yes, I have mad ethis error myself so do not do the same. ALways take precautions beforehand. If you do not add some support to the engine and it does drop slightly, you will either never get the bolts to grip or you will just strip the threads and possibly mess up the female threads on the engine.Take your time and follow the instructions R&G provide. Saying that, they do not suggest supporting the engine but I always do now.One happy customer, thanks WebikeView Detail

R&G are a great brand and provide some cracking protection for all models of bikes. They sell a lot for the CBR600RR as these bikes do hit the deck often on track. This toe guard is an essential part when riding on a track as you just do not want your foot or anything in that area in the event of an off. Finding this part number was not too hard as this version does fit a lot of different models and manufacturers. The price from Webike was good value and add with the other items in my basket, I got them all shipped together to save on teh shipping cost. EMS got my order to me in 5 days from shipping. The toe guard is super strong and the bolts that attach this to the swing arm are also really strong. As this is aluminium, it will take a fait bit of hsammer before it gives up the ghost, I know this as I previous;y had one and it took some damage before it eventually snapped. The bolts are threaded really well, the painted finsih is really good and flawless too. Fitted in no time. Very pleased with this and now it will be good to go on the track once again.View Detail