Forebygging av kroppsskrap Mens det er mange produkter som Seal, er Stomp Grip en RidingSupportGEAR som har utviklet seg til å fungere Deler av reduksjon av tretthet.
Fra STREET to Circuit har jeg fått høy støtte i ulike situasjoner.
Vi bruker proprietært Elastomer Material, et kraftig 3M lim for lim.
Selv med Hard Riding-scenen, opprettholdes Pad's original Grip power uten å bli forskjøvet.
LAGET I USA!
Stomp Grip er patronisert av Top racer, Tops Tan Rider fra forskjellige land over hele verden.
Japans krets, STREET mottok også stor popularitet.
Favoritten til Stomp Grip øker raskt over hele verden.
[Hvordan legge på stompgrep]
1. Rengjør applikasjonsflaten.
(Hvis du bruker [Farge] Ryd, vær så snill å jobbe etter at du har slettet smuss og vannskrape rent med Compoundetc.)
2. Avfett applikasjonsflaten.
3. Utfør posisjonering.
4. Vennligst lim inn fra kanten slik at ingen luft kommer inn. Vennligst skrell av bakpapiret mens du stikker det.
(Hvis du bruker [Farge] Fjern, bruk sakte sakte litt etter litt fra kanten, du kan holde fast uten at luft kommer inn.)
Stomp Grips lim krever 24 timer før limens styrke blir stabil.
Det kreves 72 timer for fullstendig vedheft.
Når det brukes før komplett liming, kan det skrelle av, eller det kan være feiljustert.
While most of the products are just a sticker to prevent scratches on the body, the Stomp Grip is a riding support gear that has evolved into a functional part to reduce fatigue.
From the street to the circuit, it is highly supported in various situations.
Originally developed elastomer material, strong 3M adhesive is used for the adhesive.
The pad keeps its original gripping power without shifting even in hard riding scenes.
MADE IN THE USA!
Stomp Grip is used by top racers and stunt riders all over the world.
It is very popular in the circuit and the street in Japan.
Stomp Grip users are increasing all over the world.
[stomping on stomp grips]
1. Clean the surface to be applied.
(When using clear, please remove dirt and water stains with compound before starting work)
2. Degrease the surface to be applied.
3. Perform positioning.
4. Apply from the edge so that air does not enter.Peel off the backing paper while pasting.
(If you use a clear sheet, apply it slowly and carefully, taking your time from the edge.It is possible to stick it beautifully without air entering.)
The adhesive of Stomp Grip needs 24 hours to stabilize the adhesive strength.
Full adhesion requires 72 hours.
If you use the product before it is fully bonded, it may peel off or shift.