Boring diameter] 76mm (Standard boring)
Slagmengde] 55mm (Normalt hjerneslag)
Kompresjonsforhold] 12,2: 1
[Produktinnhold]
· Smi-stempel 58,5 mm høyt kompresjonsstempel
· Stempelring
Stempelpinne
・ Stempellås
· Cylinderhodepakning
· Sylinderpakning
・ Pakning for strammeløfter
* Det er umulig å montere den på annet enn STD-hode.
* FI Controller 2 (Injeksjonskontroll) må installeres samtidig. Kombinasjonen med andre selskapsprodukter kan forårsake feil.
* Beholdesylinderen kan brukes på nytt, men hvis stempelavstanden er utenfor den angitte verdien, er det behov for finsliping av sylinderen.
* Vær oppmerksom på at produktspesifikasjonen kan endre seg på grunn av produsentens årsaker.
* Det er fire typer FI-CON 2. Vær oppmerksom på.
for CBR250R (MC41-1000001 til 1399999)
for CBR250R (MC41-1400001 til 1499999) 2 lampelys modell * FI-CON 2 er ikke tilgjengelig for CBR250R (MC41-1500001 eller nyere).
For CRF250L (MD38)
For CRF250L ・ CRF250 RALLY (MD44)
[Bore diameter] 76mm (Stock bore)
[Stroke amount] 55mm (Stock stroke)
[Compression ratio] 12.2: 1
[Set components]
・Forged Piston
・Piston ring
・Piston pin
・Piston Circlip
・Cylinder head gasket
・Cylinder gasket
・Tensioner lifter gasket
*This product cannot be installed on other than stock head.
*FI Controller 2 (Injection Controller) must be installed at the same time.The combination with the products of other manufacturers may cause failure.
*The stock cylinder can be reused, but if the piston clearance is outside the specified value, honing of the cylinder is required.
*There may be changes in product specifications due to the manufacturer's reasons.
*There are four types of FI-CON 2.
*For CBR250R (MC41-1000001 to 1399999)
*For CBR250R (MC41-1400001 to 1499999) 2 lamp headlight model *FI-CON 2 is not available for CBR250R (MC41-1500001 or later).
*For CRF250L (MD38)
*For CRF250L・CRF250 RALLY (MD44)
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change.