Chromoly Steel (3-lags plating)
[Spec. ] Mutter sett
* Vær oppmerksom på at produktspesifikasjonen kan endre seg på grunn av produsentens årsaker.
[Installasjon]
* Akselskaftet er en viktig del.
Vær sikker på at kvalifisert personell utfører installasjonsarbeid i proshoppen.
Vennligst gjør det ved å bruke riktig verktøy som passer for skaftets hodeform.
Det er riper på plateringsfilmen som påføres akseloverflaten, og forårsaker rust hvis du strammer med et feil verktøy.
Vennligst spray fett på akseloverflaten før installasjon.
Det forårsaker vanligvis ikke rust fra selve akselen fordi den påfører "trelagsbeleggingsprosessen" av KOOD original på akseloverflaten. Det er forårsaket av metallpotensialforskjellen, for å forhindre rusting fra hjullager etc.
Følg produsentens spesifiserte verdier for tiltrekkingsmoment.
Bekreft mutteren for kjøretøy som skal monteres med OEM-mutter.
Sørg for å bruke en ny mutter når den sees i mutteren, for eksempel riper forårsaket av fall og selvlåsende funksjonsdel. Dette for å forhindre skade på den gjengede delen av akselen.
[Om produktkvalitet]
Når det gjelder produktadministrasjon, produserer den og administrerer den i et perfekt system, men kontakt oss før jobb hvis du har problemer.
* I alle fall kan vi ikke svare på krav og returnerte produkter etter jobb (for eksempel å føre akselen gjennom hjulet) i det hele tatt.
Om rust
"KOOD-laget aksel" har blitt utsatt for "trelags beleggbeleggprosess".
Den har sterk beleggbehandling sammenlignet med vanlig belegningsbelegg. Det kan ruste avhengig av brukssituasjonen, men det har ingen betydning for kvaliteten.
Det er "rusting" ... rust fra utsiden rides på plating overflaten
Overgangs rust. Ekstern rust på belagt overflate
Skader på belegget ... Feil bruk av verktøy, steppestein eller fall under kjøring, etc.
* Rust dekkes ikke av garantien.
Takk for at du forstår.
[Material] Chromoly steel (3-layer plating finish)
With plated nut
*There may be changes in product specifications due to the manufacturer's reasons.
*Even if the vehicle is compatible, it will not fit if the front forks are not stock or if the vehicle has been customized.
[About the installation]
*Axle shafts are critical parts.
Installation must be carried out by qualified personnel at a professional shop.
・Please use the appropriate tool for the head shape of the shaft.
If the shaft is tightened with an inappropriate tool, the plating film on the shaft surface will be scratched and rust will be caused.
・Before installation, apply grease or other oil to the shaft surface.
The surface of the shaft is treated with KOOD's original "3-layer plating film", so rust will not occur on the shaft itself under normal use.The purpose is to prevent rust transfer from wheel bearings, etc., which is caused by the potential difference of metals.
・Please observe the tightening torque specified by the manufacturer.
・If the vehicle is installed using the stock nut, please check the nut.
If the nut is damaged by tipping over, etc., or if the self-locking part is worn out, be sure to use a new nut.This is to prevent damage to the shaft threads.
[About Product Quality]
・KOOD has taken all possible measures to manage the production. However, if there is any problem, please contact KOOD before the work.
*In no event will KOOD accept any claims or returns after the installation (such as threading the shaft into the wheel).
・About rust
KOOD shafts are treated with a "3-layer plating film".
It is processed with a stronger film than normal plating film.Rust may occur depending on the usage conditions, but there is no problem with the quality.
・Transferred rust: Rust from the outside gets on the plated surface
・Damage to the plating film... Improper use of tools, flying rocks during riding, falls, etc.
[Caution]
In case of KOOD shafts with plated nuts, damaging the threads during installation often happens.
Due to the nature of plating, this is often seen when the plated parts (e.g. KOOD shaft and KOOD nut) mesh with each other or when the threaded part is greaseless.
Please use an anti-corrosive grease such as sledge compound on the screw part when you install it.