Pivot Bolt x2stk.
Materiale : chromoly
* Vær oppmerksom på at produktspesifikasjonene kan endres på grunn av produsentens grunn.
[Om installasjon]
* Skaftet er en viktig del. Installasjonen må utføres av en kvalifisert person i en profesjonell butikk.
• Arbeid med riktig verktøy for formen på skaftets hode.
Hvis upassende verktøy brukes til å stramme, kan det belagte belegget på skaftoverflaten bli ripet og forårsake rust.
• Spred fett eller annen olje på akseloverflaten før installasjon.
Akseloverflaten er belagt med KOODs originale 3-lags pletteringsprosess, som forhindrer at rust oppstår på selve sjakten ved normal bruk. Dette er for å forhindre overføring av rust fra hjullager osv. Forårsaket av potensiell forskjell på metall.
• Tiltrekkingsmomentet skal overholde produsentens spesifikasjoner.
• Hvis kjøretøyet er installert med fabrikkmutrene, må du kontrollere mutrene.
Hvis mutteren er skadet av fall osv., Eller hvis den selvlåsende funksjonsdelen er slitt, må du bruke en ny mutter. Dette er for å forhindre skade på akseltrådene.
[Om produktkvalitet]
• Vi tar alle forholdsregler for å sikre at produktene våre blir produsert og administrert riktig, men hvis du har problemer, kan du kontakte oss før du jobber med dem.
* Under ingen omstendigheter godtar vi krav eller retur av produkter etter installasjon (f.eks. trer en aksel gjennom et hjul).
• Om Rust
KOOD-sjakter er belagt med en "trelags pletteringsprosess". Denne filmen er sterkere enn den vanlige pletteringsfilmen. Avhengig av bruksforholdene kan det oppstå rust, men dette påvirker ikke produktets kvalitet.
* Hovedårsakene til rust
• "Skiftende rust" : rust fra utsiden som kjører på den belagte overflaten
• Skade på plateringsfilmen : feil bruk av verktøy, steppestein eller fall under ridning, etc.
* Vær oppmerksom på at rust ikke dekkes av garantien.
Pivot bolt, set of 2
Material: chromoly
*There may be changes in product specifications due to the manufacturer's reasons.
[About the installation]
*The shaft is a critical component.Installation must be carried out by qualified personnel at a professional shop.
・Please use the appropriate tool for the head shape of the shaft.
If the shaft is tightened with an inappropriate tool, the plating film on the shaft surface will be scratched and rust will be caused.
・Before installation, apply grease or other oil to the shaft surface.
The surface of the shaft is treated with KOOD's original "3-layer plating film", so rust will not occur on the shaft itself under normal use.The purpose is to prevent rust transfer from wheel bearings, etc., which is caused by the potential difference of metals.
・Please observe the tightening torque specified by the manufacturer.
・If the vehicle is installed using the stock nut, please check the nut.
If the nut is damaged by tipping over, etc., or if the self-locking part is worn out, be sure to use a new nut.This is to prevent damage to the shaft threads.
[About Product Quality]
・KOOD has taken all possible measures to manage the production. However, if there is any problem, please contact KOOD before the work.
*In no event will KOOD accept any claims or returns after the installation (such as threading the shaft into the wheel).
・About rust
KOOD shafts are treated with a "3-layer plating film".It is processed with a stronger film than normal plating film.Rust may occur depending on the usage conditions, but there is no problem with the quality.
*Main causes of rusting
・"Transferred rust": External rust rides on the plated surface
・Damage to the plating film: Improper use of tools, stepping stones while driving, falls, etc.
[Caution]
In case of KOOD shafts with plated nuts, damaging the threads during installation often happens.
Due to the nature of plating, this is often seen when the plated parts (e.g. KOOD shaft and KOOD nut) mesh with each other or when the threaded part is greaseless.
Please use an anti-corrosive grease such as sledge compound on the screw part when you install it.