[ROTOBOX RBX2Carbon fiver hjul]
ROTOBOX RBX2, som mottok prisen, er et ultralt lett karbon fiverhjul designet for å tilfredsstille det høyeste nivået av ytelse, komfort og sikkerhet.
Bransjens første tre-komponent kompositt (Karbon - Epoksy - rustfritt stål) Og med denne unike integrerte hule CarbonCasting-konstruksjonen, kan du forvente dramatiske oppgraderinger for alle motorsykler av typen Sport.
Det er ikke rart at dette er førstevalget for mange ekspertdommere, racer- og prestasjonsorienterte motorsyklister over hele verden.
Vekten på hjulet er i stor grad relatert til motorsykkelens ytelse.
ROTOBOXCarbon hjul RBX2 er et lett og sterkt karbonfiberhjul.
Omtrent 40% lettere enn OEM-utstyrte hjul. (Varierer avhengig av kjøretøy.)
Stivhetsbalanse er også gjennomgått, og håndtering, brudd, akselerasjon osv. vil vise den beste ytelsen.
Før og etter i tilfelle BMW S1000RR
· OEM: 11.7kg
· ROTOBOX: 6.69kg (42,8% lettere)
Alternativinnstilling for DRIVEN Sprocket. (Sort, rød, blå, gull)
520 Størrelse → 39-51T
525 Størrelse → 39-51T
530 Størrelse → 39-49T
[Glans og Matte, velg finish]
Bli ferdig [Farge] Klar maling er blank (Gloss) Eller matt med alternativ (Matte) Kan velges.
Begge garanterer det høyeste nivået av beskyttelse mot riper, bulker og UV-stråler.
GlossFinish har et tydelig karbonmønster, og Matfinishen har et rolig og naturlig utseende.
[Carbon Fiber Fever]
Lett, høy stivhet, utmerket styrke og iøynefallende design er de lyse grunnene til at bruken av karbonfiber fortsetter å øke i motorsykkelindustrien.
Carbon fiver hjulet er den totale ytelsen til motorsykkel (Fra håndtering, brytning til akselerasjon) Er en av de viktigste faktorene for å forbedre den store bredden.
Bransjens første tre-komponent kompositt (Karbon - Epoksy - rustfritt stål) Med sin unike integrerte hule CarbonCasting-struktur omdefinerer ROTOBOX kvaliteten og produksjonsstandardene i hele bransjen.
Sett det på spissen for innovasjon i Carbon fiver-hjulet.
[Design in SPY in RaceTruck]
Utseendet til ROTOBOXWheel bestemmes av filosofien om å oppnå best mulig ytelse og sikkerhet uten at det går ut over de generelle designretningslinjene.
For å dra nytte av Carbon FiberComposite til den største grensen og redusere alle kjente ulemper, PRO testTeamYART (YamahaAustriaRACINGTeam) Erfaring og kompetanse innen hjuldesign.
Resultatet er Spoke, som passer Rim i et vesentlig stort område.
[UV-beskyttelsesbelegg]
Spesiell UV-beskyttelse Clear-coating beskytter karbonhjulet mot stråling mens det er veldig tynt.
Innser en klar og jevn kantflate.
[Senterdeler av høy kvalitet]
Nav som er skreddersydd til hver MODELL, er produsert av CNC-maskinering fra høykvalitets 7075 T6 aluminium kombinert gull brukt i luftfartsindustrien og satt sammen i CarbonRim.
ROTOBOXWheel er utelukkende designet for hvert motorsykkelMODEL og kan erstattes med Bolt On fra OEMWheel.
CushionDrive, Sprocket carrier, Spacer og Bearing er inkludert, og du kan velge keramikk med stål eller alternativ for lagring.
* Tannhjul krever et spesielt produkt.
[Anodisert 90-graders ventilstamme]
90-graders valvstamme av høy kvalitet holder riktig lufttrykk selv i superhøyhastighetsområdet.
[Bent Hall]
For å sikre den langsiktige kvaliteten på produktet, er det installert en Bent-hall i bunnen av hjulpaken for å forhindre kondens.
[Forbedring av rotasjons aerodynamikk]
I tillegg til å redusere vekten på hjulet, er forbedring av aerodynamikk også viktig for å forbedre ytelsen til motorsykkelen.
For å redusere den aerodynamiske koeffisienten under rotasjon, er tverrsnittet til Spoke elliptisk.
[Rib for å tåle moment]
Designet med ribber på hver spoke, er det et funksjonelt hjul som tåler moment.
[Tre slags komposittmaterialer]
Produsert ved bruk av ROTOBOXs unike trekomponents komposittmateriale som kombinerer karbon, epoksy og rustfritt stål.
En 2,5 mm rustfritt ståltråd er innebygd i hver side av kanten, noe som forbedrer slagfastheten ved de viktigste ytre delene.
[Strukturribbe]
・ Ett stykke hul CarbonCasting
ROTOBOX er verdens første og eneste Carbon fiver-hjulprodusent som utvikler og bruker et unikt trekomponent komposittmateriale som kombinerer karbon, epoksy og rustfritt stål.
Selvfølgelig komposittmaterialer, så vel som den ene delen hule CarbonCasting-produksjonsprosessen.
Flere forskjellige typer CNC-skreddersydde karbonstoffer plasseres manuelt i en støpt gullform.
For å forbedre støtmotstanden har Rims begge sider Materiale: Rustfritt stål 2,5 mm ståltråd er lagt til.
Deretter injiseres flytende Epoxy-harpiks i det forseglede og herdede verktøyet under veldig høyt trykk.
Dette PRO Set produserer monolitisk hul karbonstøping og er en spesiell høytrykks harpiksoverføring (RTM) Det er en anvendelse av teknologi.
Sørg for kontinuerlig kvalitet, sikkerhet og nøyaktighet i PRO-prosessene.
[sikkerhet først]
Hjulet er i samsvar med sikkerhetsstandarden JASO T203-85 sertifisert av JWL dotE.
[testlaboratorium]
Siden sikkerhet er en topp prioritet, har vi satt opp et ROTOBOXtest-laboratorium for kontinuerlig å sjekke og forbedre produktkvaliteten.
[Radial Fatick test]
Formålet med denne testen er å sjekke holdbarheten til Rim og navet.
For dette formålet påfører Trommel en vertikal belastning mens du roterer hjulet med en konstant hastighet på 80 km / t. (Foran: 340 kg / bak: 560 kg minimum 500.000 syklus).
[Torsion Fatick-test]
Formålet med denne testen er å sjekke holdbarheten til Spoke og navet.
Av denne grunn er hjulet festet til støtten, og kontaktflaten på navet er vridd Moment. (Foran: 442Nm / bak: 790Nm, minimum 100.000 syklus) Legg til
[Corning Fatick test]
Formålet med denne testen er å sjekke holdbarheten til Rim og navet.
For dette formålet er hjulet festet til en roterende skive og bøyd i midten av hjulet mens det roteres med konstant hastighet. (Foran: 217Nm / bak: 387Nm, minimum 100.000 syklus) Legg til
[Impacttest]
Hensikten med denne testen er å bekrefte dekkets luftretensjon og styrken til Rim, Spoke og Hub.
Vekt (Front: 225kg / Bak: 375kg) Slipp Striker fra høyden 150 mm til hjulet og bruk støtbelastning.
[ROTOBOX RBX2Carbon fiver wheel]
The award-winning ROTOBOX RBX2 is an ultra-lightweight carbon fiver wheel designed to meet the highest levels of performance, comfort and safety..
With the industry's first tri-component composite (Carbon - Epoxy - Stainless Steel) and its unique one-piece hollow CarbonCasting construction, this wheel will be a dramatic upgrade for all sports type motorcycles..
It's no wonder that this is the first choice for many expert judges, racers and performance-oriented motorcyclists around the world!.
The weight of the wheel is heavily involved in the performance of the motorcycle..
The ROTOBOX Carbon wheel RBX2 is a lightweight and strong Carbon Fibre wheel..
Approximately 40% lighter than the OEM installed Wheel. (Varies by vehicle.. )
The stiffness balance has been revised to give you the best performance in handling, breaking and acceleration..
In the case of the BMW S1000RR, front and rear
・OEM:11.7kg
ROTOBOX:6.69kg (42.8% lighter)
Option settings for DRIVEN's Sprocket. (Black,Red,Blue,Gold)
520Size→ 39-51T
525 Size→ 39-51T
530 Size→ 39-49T
[Gloss and Matte, choice of Finish]
Finish [Color] Clear paint can be selected Gloss or Matte by Option..
Both products guarantee the highest level of protection against scratches, dents and UV rays..
GlossFinish gives a clear carbon pattern and Mat finish gives a calm and natural look..
[Carbon Fibre fever]
Light weight, high stiffness, superior strength and eye-catching design are just a few of the reasons why the use of Carbon Fibre in the motorcycle industry continues to grow..
The Carbon fiver wheel is one of the most important elements to improve the overall performance of a motorcycle (from handling and breaking to acceleration) by a large margin..
With the industry's first tri-component composite (Carbon - Epoxy - Stainless Steel) and its unique one-piece hollow CarbonCasting construction, ROTOBOX is redefining quality and manufacturing standards throughout the industry..
Carbon fiver wheel puts you at the forefront of innovation.
[Design Inspired by RaceTruck]
The appearance of the ROTOBOXWheel is determined by the philosophy of achieving the highest possible performance and safety without compromising the general design guidelines..
The experience and expertise of PRO's testTeamYART (YamahaAustriaRACINGTeam) has been incorporated into the wheel design to maximise the benefits of Carbon Fibre Composite and reduce any known disadvantages..
The result is Spoke, which is compatible with Rim in a substantially wider range..
[UV Protection Coating]
Special UV-protective Clear-coating protects the Carbon wheel from radiation despite being very thin.
Provides a clear and smooth rim surface.
[High Quality Center SectionParts]
The hubs for each model are CNC machined from high quality 7075 T6 aluminum alloy gold used in the aviation industry and are permanently assembled on CarbonRim..
ROTOBOXWheels are designed specifically for each motorcycle model and can be replaced with Bolt On from the OEM wheels..
CushionDrive, Sprocket carrier, Spacer and Bearing are included, and Bearing is Steel or Ceramic can be selected by Option..
*Sprocket requires a special product.
[Anodized 90-degreesValve Stem]
High quality90-degreesValve Stem maintains proper air pressure even at very high speeds..
[Bent Hall]
To ensure the long-term quality of the product, a vent hole is located at the bottom of the wheel spoke to prevent condensation..
[Rotational Aerodynamics Improvements]
To improve the performance of the motorcycle, it is important to reduce the weight of the wheel and also to improve the aerodynamics..
The cross section of the Spoke is elliptical to reduce the aerodynamic coefficient during rotation..
[Rib to withstand Torque]
Ribs are placed at each Spoke to create a functional wheel that can withstand Torque..
[three types of composite materials]
Manufactured using ROTOBOX's proprietary three-component composite material that combines Carbon, Epoxy and Stainless Steel.
2.5mm Stainless Steel wire is integrated into each side of the Rim for increased impact resistance in the most critical outer areas..
[Structural Rib]
One piece Hollow CarbonCasting
ROTOBOX is the first and still the only carbon fiver wheel manufacturer in the world to develop and use a unique three-component composite material combining Carbon, Epoxy and Stainless Steel..
Of course, the composite material, but the one piece hollow CarbonCasting manufacturing PROcess is also novel!.
Several different types of CNC-tailored carbon fabric are placed into the molded gold mold by hand..
To increase the impact resistance, 2.5mm steel wire of Material:Stainless Steel has been added to the Both Sides of the Rim..
Liquid Epoxy resin is then injected into the sealed and tempered tool under very high pressure..
This PROcess, which produces a one-piece hollow CarbonCasting, is based on the application of the special high-pressure ResinTransfer Moulding (RTM) technology..
Ensures continuous quality, safety and accuracy of production PROces.
[Safety first]
Wheel complies with JWL dotE approved safety standard JASO T203-85.
[test lab]
As safety is our top priority, we have set up a ROTOBOXtest laboratory to constantly check and improve the quality of our products..
[Radial phatic test]
The purpose of this test is to check the durability of Rim and hub..
For this purpose, the Drum applies a vertical load while rotating the Wheel at a constant speed of 80km/h (Front:340kg/Rear:560kg minimum 500.000Cycle)..
[Torsion phatic test]
The purpose of this test is to check the durability of the Spoke and the hub..
For this reason, the Wheel is fixed to the Support and the contact surface of the hub is subjected to a torsional Moment (Front:442Nm/Rear:790Nm, minimum 100.000Cycle)..
[Corning phatic test]
The purpose of this test is to check the durability of Rim and hub..
For this purpose, the Wheel is fixed to the rotating disc and applies a bending Moment (Front:217Nm/Rear:387Nm, minimum 100.000Cycle) to the center of the Wheel while rotating at a constant speed..
[Impacttest]
The purpose of this test is to check the air retention of the tire and the strength of the Rim, Spoke and hub..
Striker with weight (Front:225kg/Rear:375kg) is dropped from 150mm height to the Wheel and impact load is applied..