[Farge] oransje
[Material / Material]
· PU harpiks
· Duraluminplate
* Påfør et avtagbart, lavt middels styrke trådlåsemiddel for installasjon.
* Kontroller slitasje på glidebryteren regelmessig.
* Ved installering på en sti bil, varierer hastigheten på slitasje avhengig av nummeret, da den er utformet for å øke styringsytelsen som den samme som raceren. (Opp til maksimalt 48)
[Material]
PU resin
Duralumin plate
*The rear sprocket setting range is narrower than the stock chain guide.If the position of the chain adjuster is too far forward when the number of pins is increased, it may interfere with the chain adjuster.
*The installation should be done with a removable low to medium strength threadlocker.
*Check the wear of the slider periodically.
*The speed of wear differs depending on the number of teeth because the guide performance is designed to be as high as that of a racer when mounted on a trail vehicle.(Maximum number of teeth: 48)
*There may be changes in product specifications due to the manufacturer's reasons.