[Materiale] Aluminium
[Spesifikasjon]
OEM styrespjeldkorrespondanse
Hole Drill for 1299S / 2015 modell PANIGALER / Super REGERA
Det er mulig å montere Brembo racing radial master.
Det er mulig å bruke standard bar ende.
* Den inneholder annen farge i bildet.
* Det stemmer ikke overens med STD-modellen.
* Den samsvarer med AE-68302 for AELLA-styrehåndtakeren.
[Material] Aluminum
[Position (compared to stock)]
・Location: Width increased by 10mm, 5mm higher at handle position clamp, 1.5mm forward
・Hanging angle: +0.5 degree
[Specification]
・Compatible with stock steering damper
・Pre-drilled holes exclusive for 1299S / 2015 Panigale R / SUPERLEGGERA
・Stock bar end (screw-in type) can be used
*Images may contain other colors.
*This product is not compatible with 1299 / 1199 stock model.
*AELLA handlebar end sliders are part number: AE-68302 is suitable.
*The left handlebar hole position is different from the Panigale 1199S handlebar (AE-27025).
*As to the use of BREMBO radial brake master, the stock switch box is too wide and the brake master is being placed more toward inside than being at the proper position.
*For this reason, the switch box is a thin product (Example: Stock HONDA Switch Box Model Number: Required to replace ti with 35130MELJ00).
*The BREMBO radial brake master does not come with a brake switch and will require one separately.
*Please note that the BREMBO radial brake master protrudes forward, so depending on the angle of the mounting lever, it may interfere with the cowl or meter bracket when the handlebar is fully locked. Avoid this by adjusting the lever mounting angle and position.