* Vær oppmerksom på at det er individuelle forskjeller i effekter. * Det er ikke et produkt med beskyttelsesfunksjon. I tillegg må du være oppmerksom på at selskapet ikke tar noe ansvar selv om det er en endring i styrken på strukturen på hjelmen slitt ved bruk av dette produktet. * Det anbefales å bruke shkin hode eller de med ekstremt kort hår. * Vennligst juster monteringsposisjonen slik at dette produktet ikke berører pannen direkte. * Vennligst slutte å bruke det umiddelbart når smerte eller kløe, osv. mens du bruker dette produktet.
[Manufacturer's Part Number] 1003HO180001 Color: electric Material: Silicon (core: Nylon) Size: Free
*The effects may vary from person to person. *This is not a product with a protection function.Webike is not responsible for any change in the structural strength of the helmet worn by the use of this product. *Not recommended for use by skinheads or those with extremely short hair. *Adjust the mounting position so that the product does not directly touch your forehead. *If you experience any pain, strong pressure or itching when wearing the product, please stop using it immediately.
■ Konsept Jeg ønsker å løse enda litt problemer når jeg lider hjelm, født ut av et slikt ønske "Airhead / AirHead" Helm Ventilation Liner som demonstrerer ventilasjonsfunksjonen ved å stikke den inne i hjelmen.
■ airhead er struktur og funksjon Lim inn en myk SilikonPad inni hjelmen (Tape er unødvendig) Dette skaper en fysisk plass mellom hjelmen og hodebunnen og skaper en luftstrøm inne i hjelmen, noe som reduserer lukten, fuktigheten, svetten og håret kollapser inne i hjelmen. (Patentoppkjøp) Antistatisk, antimikrobiell, allergisk behandling tiltak blir brukt ved hjelp av Silicon for medisinsk nivå. Unik design er et skjema utformet som passer perfekt inn i en hvilken som helst hjelm. Hvis innsiden av hjelmen er litt stor, kan du også bruke den til Størrelsesjustering.
■ Hvordan å bruke Vennligst lim inn den flate siden av produktet inne i hjelmen, slik at den fremspringende siden treffer hodebunnen, "Airhead" Vær så snill å vri retningen slik at delen merket er plassert på baksiden av hodet. Ved avhending må du fjerne det direkte fra hjelmen.
■ Omsorg Det er mulig å vaske det fra hjelmen og vaske det. Vask det med nøytralt vaskemiddel. Det anbefales regelmessig rengjøring å slippe hår, støv, sebum etc etc.
Hjelm Opprette et internt miljø! Redusere kollaps av hår og slippe ut fuktighet "AirHead: Helmet Ventilation Liner" [Webike TV]
Sommer MotorcycleTouring Comfort Små gjenstander Varer Innledning! [Webike TV]
■Concept The "airhead" was born from such a wish to solve even a little trouble when wearing a helmet.This is a ventilation liner for helmet which shows ventilation function by attaching to the inside of helmet.
■How airhead works and functions Pads made of soft silicone are attached and inserted inside the helmet, creating a physical space between the helmet and scalp and air flow inside the helmet.This reduces odor, moisture, sweat and hair crushing inside the helmet.(Patented) It is made of medical grade silicone, anti-static, anti-bacterial and anti-allergic. The unique design is shaped to fit perfectly inside any helmet. It can also be used to adjust the size if the inside of the helmet is slightly large.
■How to use Attach the flat side of the product to the inside of the helmet so that the protruding side touches the scalp.When doing so, orient the airhead so that the part labeled "airhead" is at the back of the head.When removing the helmet, peel it off from the helmet as it is.
■Care It can be removed from the helmet and washed with water.It can be washed with neutral detergent.Periodic cleaning is recommended to remove hair, dust, sebum, etc.
Creating an environment inside the helmet!Air head" to reduce hair crushing & release moisture: Ventilation liners for helmets" [Webike TV]
Summer motorcycle touring comfortable small goods introduction!
Forsiktighet
* The helmets sold on this site are based on the Japanese safety standard. We are not responsible for accidents, damage, injury, or any other related matters as a result of purchasing this product.
I bought it for summer comfort. I originally wear a cold inner, but when I put this one on, it makes the cover shallower. Therefore, a just size Helmet may feel cramped. The MZ has always been well ventilated, but now that it is even better ventilated, it is an essential piece of equipment for summer.View Detail
I'm using it on my SHOEI JCruise, which has been in use for five years and has a dented interior. I bought this because I use it for my daily commute and can't wash it often, so I hoped it would be less prone to sebum stains.
I am not sure about the sebum stains on the Helmet interior as I throw it in the washing machine whenever I feel like it. I put one between the interior and the other, so I think it's less likely to stick. I can't tell if my hair is messed up at all because I have a shaved head. I feel that the Helmet's Bench effect is enhanced because I feel more air flowing through my head.
The biggest demerit is that if you wear it for a long time, you will get warts on your head. The Inner Cap is a necessity if you are going to ride for a long time.View Detail
Just wear it inside your Helmet and it won't crush your hair! The only thing to remember is to wear it behind the hairline on your forehead! If you don't, you'll have a warty mark on your forehead like a Krillin.View Detail
It's the height of summer and the Helmet is stuffy. I washed the interior of Helmet. Introduced with it. The reason for this is because the interior of the helmet is a little worn out. As I tend to sweat on my head more than other people, it's a great way to get a breeze through. You can actually feel the breeze when you wear it. But it's also sweaty and hot, so my hair does get steamy and crushed by sweat. But I feel like it's a bit better than the sticky front of my head, though. I'm grateful for that alone when I use the Motorcycle to commute to work. I didn't have any painful warts that left marks on my head, as other Impressions have said. In that respect, I think it suited my head and the shape of the Helmet. The Z7 is not a bad fit for the Helmet. I felt the chin strap was a little tight due to the small size. I'm thinking of using it to protect my hair during the winter months.View Detail
This is a postscript to my previous Impression. Today I went on a short touring trip, wearing a helmet, running for about an hour and taking a break. When I went to Toilet and looked in the mirror, I found a VentilationLiner in the upper forehead area around the hairline I had arrived Clearly with the remains of the protrusion of the It's quite embarrassing, even more so since my forehead is slowly receding. I can feel the comfortable cooling effect today, so I will use Inner I'm going to use Cap.View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!