* Det er tilfeller at det har noen riper under transport fra produsenten, og det kan være burr og etc. igjen på produktet. Det kan være ujevnhet eller chipping i maling, men disse er innenfor standardspesifikasjonene for RAM-mount.
* Selskapet vil ikke være ansvarlig for eventuelle skader forårsaket av bruk av dette produktet.
Sørg for å montere og bruke etter kundens skjønn (Vennligst bruk når du har kontrollert at den er ordentlig montert. I tillegg anbefales det å ta tiltak for å forhindre faller som stropper bare i tilfelle).
* Det har ikke en egen håndbok montert på RAM-produktet. * Det krever å stramme håndtaksklemmen.
Vennligst kontroller tilspenningsmomentet til hver produsentens vedlikeholdsinformasjon og vær forsiktig så du ikke forårsaker problemer under kjøring.
* Den inneholder for tiden svart, sekskantbolten kan være svart, avhengig av partiet.
* Det er tilfeller at det har noen riper under transport fra produsenten, og det kan være burr og etc. igjen på produktet. Det kan være ujevnhet eller chipping i maling, men disse er innenfor standardspesifikasjonene for RAM-mount.
* Produsentene er ikke ansvarlige for eventuelle skader som følge av bruk av dette produktet. Vær sikker på å montere og bruke etter kundens skjønn. (Vær så snill å sørge for at den er ordentlig festet, bruk igjen og anbefaler også å ta tiltak for å hindre fall av stropp bare i tilfelle).
* Det har ikke en egen manual montert på RAM-produktet.
Type: cradle holder
Color: Black
Size: By Ball
Weight [grams]: 105g
Material [Material]: High strength composite
Mounting length 120.6-146mm, width 55.6-82.5mm, thickness - 18.2mm
Quantity: 1 pc.
Components: Mounting Screws, #8-32 x 1/2inch Machine Screw, #8-32 x 5/8inch Machine Screw, #8-32 x 3/4inch Machine Screw, #8-32 Nylock Nut
*The ball part is not included.(A diamond-shaped joint to be attached to the back is required separately.)
*Please use straps or other devices as necessary to prevent the device from falling off.
*Please secure the device with a strap to prevent it from falling off.
*Do not operate or adjust the mounting object or the ram mount product while riding, as it is dangerous.
*We will not compensate for any damage caused by vibration or removal of the product during or after installation, or for any trouble caused by installation method or combination of parts without any defect in the Ram Mount product.
*In order to prevent unexpected breakage of parts, malfunctions, or accidental damage caused by deterioration of materials (including rust) due to use environment, aging, or wear and tear, always inspect the product before use and discontinue use or replace the product with a new one if any abnormality is found.
*Fitting sizes in the image are for reference only.It does not take into account the interference of the side buttons of each model.
*There may be changes in product specifications due to the manufacturer's reasons.