APE / Det er Swing Arm som kan feste Wheel of Monkey R til GORILLA.
Swing - Arm Bredden er laget for å matche 188 - 191 mm.
Ved å bruke MONKEY R's 10Inch-hjul, er det mulig å lage MONKEY 10 tommer.
■ Alternativ Beskrivelse
[Swing Arm finish]
・ Svart anodisert etterbehandling (GCraft varenummer : 60198) Tasu25000 yen
・ SeraCoat-finish (GCraft varenummer : 60807) Tasu30000 yen
[Hva er SeraCoat?]
SeraCoat er en maling laget av NIC, som for tiden brukes i USAs militærkamp, spesiell bakemaling, kaldmaling.
Det er inspisert for å kunne takle tøffe forhold, og det er en maling som produseres og produseres for ytelsesvekt som varmebestandighet, slitestyrke, holdbarhet, løsningsmiddelresistens, varmespredning, termisk isolasjon etc.
Keramikk er pulverisert av en spesiell maskin og blandet i maling for å forbedre styrken på beleggfilmen 。 På grunn av det blir det en satinlignende overflate, men belegget kan gjøres veldig tynt (25Micron)
Sveisemerker (Bead) Det er også mulig å gå uten å gjemme seg.
Adhesivitet er den høyeste verdien blant Coating-materialer, Rynk kan ikke dannes selv ved bretting, maling blir ikke lett avskallet av stepping stones, så det passer for ramme, Swing Arm overflatebehandling.
* Normal leveringsdato + 3-5 uker.
[Alternativ : Chain SliderSpec.]
KjedebryterBolt Stopp Spes. (GCraftProductNo : 60228) +1000 yen
Bytt kjede glidebryter fra Rivet Stopp til Bolt Stopp 。 Lett å erstatte når den er slitt.
[Alternativ : Stand HookBase tilleggsbehandling]
Stand HookBase (M6) Tilleggsbehandling (GCraftProductNo : 60903) +3000 yen
GCraft gjorde stativhook eller utenfor firmaet laget stativhook, (M6) Du kan installere.
[Alternativ : Pivot del struktur]
Pivot del Bearing spesifikasjon (GCraftProductNo : 60006) +3000 yen
Standard endrer Pivot-delen av Bush til Bearing.
Forbedret holdbarhet og glatte driftskarakteristikker blir realisert.
This is a swingarm which can be used for Monkey / Gorilla with Monkey R's wheel.
The width of the swinging arm is designed to be 188-191mm.
It is possible to use the 10 inch wheel of Monkey R to make Monkey 10 inch.
■Option Description
[Swingarm finish]
・Black anodized finish (G-Craft part number: 60198)
・Cerakote finish (G-Craft part number: 60807)
[What is Cerakote?]
Cerakote is a special heat coloring and normal temperature paint manufactured by NIC and currently used by the US military.
It has been inspected to meet the harsh conditions, and has excellent heat resistance, abrasion resistance, durability, solvent resistance, heat dissipation, heat insulation and other performance-oriented research and production.
Ceramic is crushed by a special machine and mixed into the paint to improve the strength of the paint film.Therefore, the surface becomes pear-shaped, but the coating film can be made very thin (25 microns)
Weld marks (beads) can be left on the surface without being hidden.
The adhesion is the highest among all coating materials, and the surface treatment is suitable for frames and swingarms because it does not wrinkle even when bent, and the paint does not peel off easily even by stepping stones.
*Please allow 3 to 5 weeks for normal delivery.
[Options: Chain Slider Specifications]
Chain slider bolt fixing specification (G-Craft part number: 60228)
Change the chain slider from riveted to bolted.Easy to replace when worn out.
[Options: Additional processing of stand hook base]
Stand hook base (M6) additional processing (G-Craft part number: 60903)
G-Craft stand hook or aftermarket stand hook (M6) can be attached.
[Options: Pivot section structure]
Pivot section bearing specification (G-Craft part number: 60006)
The standard is to change the pivot part of the bushing to a bearing.
Improved durability and smooth operating characteristics.