- Topp Produkter
- Kunde anmeldelser
-
WM Baksetet sett
Since there is no one for VOLTY, I modified ST250 and put it on.
Les mer
It doesn't go back that far.
Condor Handle is reversed, but it is not so hard position.
The Shift side can be installed b... -
WM Baksetet sett
It's not mentioned in the manual. What is this? and I had to do a little work to install the brake switch.
Les mer
If you install the Switch according to the Instruction Manual, there are two problems... -
WM Lucas type hale lampesett
Well made kit that fit perfectly. The plate licence plate adapter has different hole spacing than the North American ones but not too difficult to adapt.
Les mer -
WM Håndtak Stopper
For making ST250 into a separate handle, it is indispensable.
Les mer
However, although Locke can seemingly do it in the top bridge for separate handles and combined use which cannot use a handle loc... -
WM Berry Short Aluminum Rear Fender
Similarly purchase and attachment were carried out with the double seat of WM.
Les mer
To the impression which the sight of its back felt quite refreshed.
It seems that a sheet also merely needs ...
- Topp Produkter
- Kunde anmeldelser
-
OSCAR Front Fender Short B Black Gel
Impressed with the great quality of this mudguard; fits the TU250 perfectly and a real improvement on the stock for a much more refined look.
Les mer -
OSCAR Lucas Tail Lamp Set
I wanted to make the area around the rear amps Compact and replace it with the OEM Bracket I bought it because I thought it would be easy to do
Les mer
Under normal circumstances, the effect would hav...
- Topp Produkter
- Kunde anmeldelser
-
HURRICANE Svelg Φ7 / 8-tommers håndtaksstål
Timing was not available for Tommaselli, so I bought it in time
Les mer
The looks and Position are great, but … it won't pass inspection. w -
HURRICANE Condor Φ7 / 8-tommers håndtaksstål
[How is it used?
I changed XJR400R from OEM Handlebar to this Condor Handle.
Was the one you received as per Image?
The precision of the construction is good and the shape is cool.Les mer -
HURRICANE Continental 1 Type Φ7 / 8-inches Håndtaksstål
Not a lot you can say about handlebars. They look good and seem to be of a high quality, time will tell. However there are a few points worth mentioning. There is a manufacturers sticker where th...
Les mer -
HURRICANE Condor Φ7 / 8-tommers håndtaksstål
Separate Handlebars were out of stock, so I put the Condor Handle on backwards and tilted it forward. It is very forward leaning and narrow, so I think it will be strange to use Large until I get...
Les mer -
HURRICANE Continental 1 Type Φ7 / 8-inches Håndtaksstål
I replaced Handlebar to immeChain.
Les mer
The height of the handlebar is now much lower.
It's so much easier to ride. -
HURRICANE BM Continental 1 Type Φ7 / 8-inches Håndtaksstål
I put it on my st250, but the OEM handlebar made me look awkward when riding.
Les mer
The quality is not luxurious, but it feels solid! -
HURRICANE Flat Continental 2 Type Φ7 / 8-inches Håndtaksstål
This is a change from Plating of the same type.
Les mer
On the LeftGrip side, there is a paper seal with the product number, ManufacturerMain and product name, which is still difficult to remove.<... -
HURRICANE Flat Continental 4 Type Φ7 / 8-inches Håndtaksstål
[How is it used?
Les mer
I wanted to replace the Grip and Bar End while I was doing the Lever replacement, so I replaced the Handlebar too!
Was the one you received as per Image?
While sligh... -
HURRICANE Håndtak Opp Spacer H25
I used it on my MT-03.
Les mer
It can be installed without any problem.
Because I used it in combination with EZ-FIT BAR this time.
Throttle Cable is no longer delivered.
In this case... -
HURRICANE BM Continental 2 Type Φ7 / 8-inches Håndtaksstål
Replaced the Handlebar width to make it narrower for the VANVAN200 Custom.
Les mer
The Image is approximately half a fist inside and one handful down from OEM.
As a result, it is easy to sl...
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING