- Passer inn:
- SUZUKI GSR400 -12 *Ask to drill switch holes|* Normal side caps can be used.
- KAWASAKI BALIUS2 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI ZEPHYR750 RS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI ZEPHYRX *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI ZEPHYR750 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- ...og mer.
[How is it used?I changed XJR400R from OEM Handlebar to this Condor Handle.Was the one you received as per Image?The precision of the construction is good and the shape is cool.Was the installation di...Les mer - Passer inn:
- Others Universal
- SUZUKI GRASS TRACKER Big Boy 09-12 (FI car)*You can use stock side caps.
- SUZUKI GRASS TRACKER Big Boy -08-8(Carburetor)*Drilling of switch hole is required|*You can use stock side cap. |*It is necessary to change the direction of the throttle cable
- clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
- SUZUKI GRASS TRACKER 09-12 (FI car)*You can use stock side caps.
- ...og mer.
Not a lot you can say about handlebars. They look good and seem to be of a high quality, time will tell. However there are a few points worth mentioning. There is a manufacturers sticker where the gri...Les mer - Passer inn:
- SUZUKI GSR400 -12 *Ask to drill switch holes|* Normal side caps can be used.
- KAWASAKI BALIUS2 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI ZEPHYR750 RS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI ZEPHYRX *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI ZEPHYR750 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- ...og mer.
Separate Handlebars were out of stock, so I put the Condor Handle on backwards and tilted it forward. It is very forward leaning and narrow, so I think it will be strange to use Large until I get used...Les mer - Passer inn:
- Others Universal
- SUZUKI GRASS TRACKER Big Boy 09-12 (FI car)*You can use stock side caps.
- SUZUKI GRASS TRACKER Big Boy -08-8(Carburetor)*Drilling of switch hole is required|*You can use stock side cap. |*It is necessary to change the direction of the throttle cable
- clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
- SUZUKI GRASS TRACKER 09-12 (FI car)*You can use stock side caps.
- ...og mer.
I replaced Handlebar to immeChain.The height of the handlebar is now much lower.It's so much easier to ride.Les mer - Passer inn:
- YAMAHA XJR400R 01-07 RH02J *Processing to open switch hole required|*Side cap required (for 18mm diameter)
- YAMAHA XJR1300 07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID)
- YAMAHA XJR1300 00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID)
- YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required
- ...og mer.
I put it on my st250, but the OEM handlebar made me look awkward when riding.The quality is not luxurious, but it feels solid!Les mer - Passer inn:
- HONDA FTR223 (without side numbers) * Requires modification of the clutch cable and choke cable.
- HONDA CB750 04- RC42 *Processing of switch hole required|* Required side cap (for 18mm ID)
- HONDA CB400SF 99-07 NC39 VTEC *Processing of the switch hole is required|* Required side cap (for 18mm ID)
- HONDA CB400SUPER BOLDOR 05-07 NC39 *Processing of switch hole required|* Required side cap (for 18mm diameter)
- HONDA CB400SF 99-07 NC39 VTEC III* requires drilling of switch hole|* requires side cap (for 18mm ID)
- ...og mer.
This is a change from Plating of the same type.On the LeftGrip side, there is a paper seal with the product number, ManufacturerMain and product name, which is still difficult to remove.If you could m...Les mer - Passer inn:
- KAWASAKI ZEPHYRX *Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
- KAWASAKI ZEPHYR400 *Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
- HONDA NC700S 12 (Excluding ABS and DCT models)*Processing of switch hole drilling required|*Side cap required (for inner diameter φ18mm)
- YAMAHA XJR400R 01-07 (RH02J)*Processing of switch hole drilling required|*Side cap (for inner diameter φ18mm)|*Please install the bar end upward.
- YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
- ...og mer.
[How is it used?I wanted to replace the Grip and Bar End while I was doing the Lever replacement, so I replaced the Handlebar too!Was the one you received as per Image?While slightly lower than OEM, n...Les mer - Passer inn:
- YAMAHA XJR400R 01-07 RH02J *Processing to open switch hole required|*Side cap required (for 18mm diameter)
- YAMAHA XJR1300 07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID)
- YAMAHA XJR1300 00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID)
- YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required
- ...og mer.
Replaced the Handlebar width to make it narrower for the VANVAN200 Custom.The Image is approximately half a fist inside and one handful down from OEM.As a result, it is easy to slip through and I am g...Les mer - Passer inn:
- KAWASAKI ZRX400II *Requires drilling of switch hole|*Applicable side cap (for 18mm dia.)|*Cannot be installed on models 05 and later due to interference with the cowl.
- KAWASAKI W400 *Required Switch Hole Drilled
- KAWASAKI ZRX400 -04 *Processing to drill switch holes is required|* Required side cap (for 18mm I.D.)|*Not available for the models after 05 due to interference with the cowl.
- HONDA MONKEY 84-07 (Z50J-1600008-|AB27-1000001-1899999)*With Top Bridge H30 Holder or MONKEY Handle Holder required
- HONDA HORNET250 *Need to drill switch hole
- ...og mer.
I reverse engineered it on my XJR1300.I was not satisfied with the position and appearance of the Tommaselli separate handlebar I had previously installed, so I changed to a Pipe Handlebar.This was th...Les mer - Passer inn:
- SUZUKI GSR400 -12 *Ask to drill switch holes|* Normal side caps can be used.
- KAWASAKI BALIUS2 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI ZEPHYR750 RS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI ZEPHYRX *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI ZEPHYR750 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- ...og mer.
The installation was no problem and I like using it without feeling any fatigue.Les mer - Passer inn:
- Others Universal
- SUZUKI GRASS TRACKER Big Boy 09-12 (FI car)*You can use stock side caps.
- SUZUKI GRASS TRACKER Big Boy -08-8(Carburetor)*Drilling of switch hole is required|*You can use stock side cap. |*It is necessary to change the direction of the throttle cable
- clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
- SUZUKI GRASS TRACKER 09-12 (FI car)*You can use stock side caps.
- ...og mer.
这个车把比原厂的车把窄了不少,另外,原厂的那个车把真得好重,这个则要轻很多。然后这个车把他不像原厂的车把有往回弯的那样,所以整个骑行的姿势会往前稍稍前倾一些,而原来的姿势是直直的坐着,相比较而言我还是更喜欢这个姿势,腰部会更舒服一些。车把短了有一些别的问题,national cycle的这个挡风适配不如原来的车把好了。
------------------------------------...Les mer - Passer inn:
- HONDA CB400SF -98 NC31 *Processing of switch hole required|* Required side cap (for 18mm ID)
- YAMAHA XJR1300 00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID)
- KAWASAKI 250TR -06 *Requires switch hole drilling|* Requires changing the orientation of the brake banjo and throttle holder.
- SUZUKI GRASS TRACKER Big Boy 09-12 (FI car)*You can use stock side caps.
- HONDA APE 50 08-12 (FI Drum Brake) *Processing of switch holes is required
- ...og mer.
The specs have been changed from the OEM height to a slightly lower, slightly narrower version for long touring. The overall width has been narrowed to reduce vibration and increase comfort. It's also...Les mer - Passer inn:
- YAMAHA XJR400R 01-07 RH02J *Processing to open switch hole required|*Side cap required (for 18mm diameter)
- YAMAHA XJR1300 07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID)
- YAMAHA XJR1300 00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID)
- YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required
- ...og mer.
Installed on a GLADIUS 650650. replaced the OEMHandlebar as it was too Up and tiring.The Sauce angle will be good and the Position will be just right.Of course, there is no hole, so you can borrow an ...Les mer - Passer inn:
- YAMAHA XJR400R 01-07 RH02J *Processing to open switch hole required|*Side cap required (for 18mm diameter)
- YAMAHA XJR1300 07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID)
- YAMAHA XJR1300 00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID)
- YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required
- ...og mer.
The Yamaha Y's Gear, which is slightly lower than the NORMAL and is attached with Option:The SR Moderate Screen now stands out. It seems to be compatible with Posh-Classical Rear Sets though the run i...Les mer - Passer inn:
- KAWASAKI ZEPHYRX *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI BALIUS 91-94 *Processing of switch hole required|* Required side cap (for 18mm diameter)
- HONDA NC700S 12 (except for ABS and DCT cars) *Processing of switch hole is required|* Required side cap (for 18mm diameter)
- HONDA CB750 04- RC42 *Processing of switch hole required|* Required side cap (for 18mm ID)
- HONDA FTR223 (without side numbers) * Requires modification of the clutch cable and choke cable.
- ...og mer.
I bought it to put a Bar end mirror on my SR500The OEMHandlebar can't be fitted with a bar end because the end is welded shutI chose this product to make the Handlebar as close to the OEM shape as pos...Les mer - Passer inn:
- YAMAHA XJR400R 01-07 (RH02J)*Processing of switch hole drilling required|*Side cap required (for inner diameter 18mm)
- YAMAHA XJR1300 07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID)
- YAMAHA XJR1300 00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID)
- YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required
- ...og mer.
I've been using the EZ-FIT-Bar, but I just need a little more height! And greedyI purchased this productThe quality is good with no plating irregularities and no surface scratches400ccClass for Replac...Les mer - Passer inn:
- HONDA FTR223 (without side numbers) * Requires modification of the clutch cable and choke cable.
- HONDA CB750 04- RC42 *Processing of switch hole required|* Required side cap (for 18mm ID)
- HONDA CB400SF 99-07 NC39 VTEC *Processing of the switch hole is required|* Required side cap (for 18mm ID)
- HONDA CB400SUPER BOLDOR 05-07 NC39 *Processing of switch hole required|* Required side cap (for 18mm diameter)
- HONDA CB400SF 99-07 NC39 VTEC III* requires drilling of switch hole|* requires side cap (for 18mm ID)
- ...og mer.
I got a raggedy VCR and the Handlebar that came with it was so lame SoI couldn't help but buy itAnd the texture is good and works fineIt's nice to have a low price and easy to buyLes mer - Passer inn:
- YAMAHA XJR400R 01-07 RH02J *Processing to open switch hole required|*Side cap required (for 18mm diameter)
- YAMAHA XJR1300 07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID)
- YAMAHA XJR1300 00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID)
- YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required
- ...og mer.
Motive for purchasingI use it on my W800In order to change the Mirror to a Bar end mirror, the OEM's Handlebar I couldn't do it with the Weight in it, so I bought this one!The OEM Handlebar was also g...Les mer - Passer inn:
- Others Universal
- SUZUKI GRASS TRACKER Big Boy 09-12 (FI car)*You can use stock side caps.
- SUZUKI GRASS TRACKER Big Boy -08-8(Carburetor)*Drilling of switch hole is required|*You can use stock side cap. |*It is necessary to change the direction of the throttle cable
- clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
- SUZUKI GRASS TRACKER 09-12 (FI car)*You can use stock side caps.
- ...og mer.
Качественный, красивый руль. Установил его вместо оригинального. Очень удобный для меня по сравнению с оригинальным. Удобнее посадка, легче и комфортней управлять байком. Минусы немного шире оригинала...Les mer - Passer inn:
- YAMAHA XJR400R 01-07 RH02J *Processing to open switch hole required|*Side cap required (for 18mm diameter)
- YAMAHA XJR1300 07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID)
- YAMAHA XJR1300 00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID)
- YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required
- ...og mer.
Purchased along with the X11's Pipe HandlebarI didn't want to change the Position, even though it is made into a bar handle, so I had to take a few steps exactly Choose a Handlebar that measures and r...Les mer
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING